Speaker cable LIBOX LB0008 2×1.50 mm CCA, 100 m, transparent

LIBOX LB0008 speaker cable with two 1.50 mm conductors made of Copper-Clad Aluminium (CCA) and a transparent outer jacket. The cable comes on a 100 m roll and is intended for connecting loudspeakers in home and commercial audio systems. With a lightweight construction and straightforward termination, this speaker cable is suitable for runs where cost-effective wiring and ease of installation are priorities. The stated weight is approximately 2.5 kg, which makes handling and routing manageable during installation.

Advantages

The cable combines the conductivity benefits of a copper cladding with the lower cost and reduced weight of an aluminium core. Its transparent jacket allows visual inspection of the conductors and polarity markings. Supplied in a 100 m length, the roll reduces the need for joints on long runs. The 1.50 mm conductor size provides a balance between flexibility and current-carrying capacity for typical loudspeaker loads in residential and light commercial applications.

Suitable for

• Wiring loudspeakers in residential audio systems
• Installing speakers in restaurants, shops or small public venues
• Long cable runs where a lightweight, budget-friendly conductor is required
• DIY audio projects and temporary sound setups

Key specifications

• Conductor type: Copper-Clad Aluminium (CCA)
• Number of conductors: 2
• Conductor cross-section: 1.50 mm²
• Cable length: 100 m
• Outer jacket colour: Transparent
• Approximate weight: 2.5 kg

How to use

Measure the required length and cut the cable from the roll. Strip the outer jacket and individual conductor insulation carefully to expose the conductor ends without nicking the metal. Terminate with appropriate speaker connectors, banana plugs, spade lugs or by secure screw-terminal connections at the amplifier and speaker ends. Observe polarity markings on the cable to maintain correct phase between amplifier and loudspeaker. For long runs, avoid sharp bends and secure the cable with clips or cable ties at regular intervals to prevent strain.

Usage recommendations

Use this CCA speaker cable for general-purpose and budget-conscious installations. For high-power systems, very long runs or where minimal signal loss is critical, consider using pure copper conductors of larger cross-section. Keep the cable away from mains wiring to reduce electromagnetic interference and follow local installation codes regarding cable routing and fixing.