Hurry and order now – up to 50% off!
In cart {{totalProductsCount}} item(s)
Your cart is empty
Speaker cable LIBOX LB0008-10 2x1.50 mm CCA, 10 m, transparent
The Libox Speaker Cable 2x1.50mm LB0008-10 10m Transparent is a two-conductor audio cable designed for connecting passive speakers and amplifiers in domestic audio installations. Constructed with Copper-Clad Aluminium (CCA) conductors and a transparent outer jacket, the cable combines electrical conductivity with a lightweight build and a discreet visual profile suitable for visible or in-wall routing.
This speaker cable provides a balance between cost-effectiveness and practical performance. The 2x1.50mm conductor cross-section supports typical home audio speaker loads, while the CCA construction offers lower weight compared with pure copper conductors. The transparent sheath makes the cable less conspicuous in living areas and simplifies alignment with existing décor. At 10 meters, the length accommodates common room layouts without requiring splices.
Prepare the cable ends by stripping a small section of the outer jacket and separating the two conductors. Strip insulation from each conductor to expose the required length of conductor for the terminal type you will use (banana plug, spade lug, or bare-wire binding posts). Observe polarity markings or conductor color/marking to maintain correct phase between amplifier and speaker. Insert or attach the conductors securely to the amplifier and speaker terminals, ensuring good mechanical and electrical contact. Route the cable to avoid sharp bends and sources of electromagnetic interference, and secure it with clips or adhesive-backed mounts as needed.
For best results in home audio systems, use this cable for runs up to 10 meters between amplifier and speaker. When longer runs or higher current handling is required, consider using a larger cross-section copper cable. Keep cable away from mains power wiring to reduce potential hum and interference, and ensure polarity is consistent across all speaker connections for proper sound staging.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}