Speaker cable LIBOX LB0009 2×2.50 mm CCA, 100 m, Transparent

LIBOX LB0009 speaker cable 2×2.50 mm CCA in a 100 m reel with a transparent jacket is intended for connecting loudspeakers in residential and commercial audio systems. The cable uses copper-clad aluminium (CCA) conductors with two conductors of 2.50 mm cross-section each, supplied on a 100 m spool for long runs. The transparent insulation makes the cable easy to route and visually inspect while keeping a discreet appearance in installations where cable visibility matters.

Advantages

The LIBOX LB0009 provides a cost-effective wiring solution for speaker connections where long lengths are needed. CCA conductors offer reduced material cost while maintaining basic electrical conductivity suitable for many domestic and light commercial audio setups. The 100 m reel reduces the need for joints and splices in long runs, and the transparent outer jacket facilitates cable tracing and placement during installation.

Suitable for

• Home stereo and multiroom speaker connections
• Small commercial audio installations such as offices, cafés, and retail spaces
• Long-distance runs where a single continuous reel is preferred
• Visible routing applications where a clear jacket is desired

Key specifications

• Conductor type: Copper-clad aluminium (CCA)
• Conductor configuration: 2×2.50 mm²
• Cable length: 100 m
• Outer colour: Transparent
• Weight (approx.): 4.4 kg

How to use

Cut the required length from the 100 m reel and strip the outer insulation to expose the conductors. Observe correct polarity when connecting to amplifier and speaker terminals to maintain phase coherence. For best results, use properly sized connectors or soldered joints where appropriate and avoid sharp bends or kinks. Secure the cable along its run with appropriate clips or conduits to prevent mechanical strain and to maintain a tidy installation.

Usage recommendations

Use the LIBOX LB0009 for runs up to the recommended distances for your speakers and amplifier power; consider using thicker pure copper speaker cable for high-power systems or long runs where lower resistance is critical. Ensure terminals are clean and connections are secure to minimize contact resistance and potential signal loss.