Cable Clamp Lightwin DC 10MM SEAL 5-3.5MM

The Lightwin DC 10MM SEAL 5-3.5MM cable clamp secures round cables with an outer diameter of approximately 5 mm while providing dust- and moisture-resistant sealing. Constructed for durability, this clamp is intended for through-panel or housing entry where a reliable environmental barrier and mechanical strain relief are required. Its compact design fits a 10 mm panel or hole diameter and supports installations in electrical enclosures, junction boxes, lighting fixtures and other equipment that demand cable protection and a neat cable entry.

Advantages

This cable clamp offers integrated sealing to reduce ingress of dust and water, helping to preserve connector and cable integrity. The product provides strain relief that lowers stress on cable terminations and connectors, extending service life in both static and moderately vibratory environments. Installation is straightforward and requires only a compatible panel cut-out; the clamp’s low profile and robust material ensure consistent performance in indoor and sheltered outdoor locations. The design also contributes to a tidy installation with reduced risk of abrasion at the entry point.

Suitable for

• Sealing and securing 5 mm diameter round power or signal cables
• Cable entry in electrical enclosures and junction boxes
• Lighting fixtures and LED driver connections
• Appliances, control panels and instrumentation housings
• Indoor and sheltered outdoor installations requiring dust and moisture protection

Key specifications

• Cable diameter accommodated: ~5 mm (suitable for cables from approximately 3.5 mm to 5 mm outer diameter)
• Panel/hole diameter requirement: 10 mm nominal
• Function: cable clamp with integrated seal and strain relief
• Material: durable polymer designed for mechanical protection and environmental sealing
• Installation type: snap-in or push-fit into panel cut-out (compatible with 10 mm hole)
• Protection: prevents ingress of dust and moisture at cable entry point

How to use

Prepare a clean 10 mm diameter hole in the panel or enclosure where the cable passes through. Select the cable clamp and push it into the panel opening until it snaps or seats firmly in place. Insert the cable through the clamp, ensuring the cable outer diameter fits within the sealing section (approximately 3.5–5 mm). Confirm the seal is seated around the cable and that the clamp provides adequate strain relief without deforming the cable insulation. For removals or adjustments, gently pry the clamp from the panel edge and re-install after repositioning the cable.

Usage recommendations

Use this clamp for fixed cable installations where mechanical protection and ingress resistance are required. Avoid using it with cables that significantly exceed the specified diameter range or with oily, chemically aggressive environments unless material compatibility is verified. For outdoor exposed installations, combine with additional weatherproofing measures if long-term direct exposure to sunlight or heavy rain is expected.