Fibre Optic Hybrid DisplayPort 1.2 to HDMI Cable Lindy 10m

The Lindy Fibre Optic Hybrid DisplayPort 1.2 to HDMI 18G Cable (10m) provides a direct, single‑cable connection to extend a DisplayPort source to an HDMI display over long distances. The hybrid design combines fibre optic and copper conductors in one slim, flexible cable to extend video signals far beyond standard copper-only cables while remaining compatible with common DisplayPort and HDMI devices. The cable includes a DisplayPort connector on the source end and a standard HDMI Type A connector on the display end, and is supplied as a single 10 metre length for straightforward installation without separate transmitter or receiver units.

Advantages

The hybrid construction offers low attenuation over long runs and increased immunity to RF and EM interference, making the cable suitable for electrically noisy environments such as factory floors or medical facilities. Its narrow, flexible profile allows discreet routing through walls and conduits for tidy AV installations in lecture theatres, meeting rooms and public venues. Active signal conversion supports both dual‑mode and non‑dual‑mode graphics cards and ensures reliable output to HDMI displays at high resolutions.

Suitable for

• Connecting laptops or PCs with DisplayPort outputs to HDMI monitors or TVs
• Long‑distance AV runs in auditoriums, lecture theatres and conference rooms
• Digital signage and public displays requiring 4K content
• Environments with high RF/EM interference such as industrial or medical sites

Key specifications

• Length: 10 m
• Source connector: DisplayPort (male)
• Display connector: HDMI Type A (Standard, male)
• Standard: DisplayPort 1.2 to HDMI 18G
• Maximum resolution: up to 4K UHD 3840x2160 @60Hz 4:4:4 8‑bit
• Construction: hybrid fibre optic and copper
• Colour: Black

How to use

Connect the DisplayPort end to the computer or source device and the HDMI Type A end to the target monitor or TV. Ensure both devices are powered on and set the display source on the HDMI device to the correct HDMI input. The cable performs active conversion, so no external adapters or power supplies are required. If the image does not appear immediately, check the source display output settings and the graphics card multi‑display configuration.

Usage recommendations

For best results, avoid tight bends and kinks near the connectors; route the cable through conduits or cable trays with gentle curves. When used in long AV installations, verify the display’s input settings and the graphics card’s output mode (dual/non‑dual) to ensure optimal resolution and colour sampling.