-
Cable shielding:
The protective layer for the cable, typically made of plastic.
-
Aluminium braid
-
Plug and Play:
Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
-
Yes
-
AWG wire size:
-
28
-
Contact material:
-
Copper
-
Connector housing material:
-
Polyvinyl chloride (PVC) / Acrylonitrile butadiene styrene (ABS)
-
Cable type:
Type of cable e.g. electicity cable, optical cable.
-
Round cable
-
Jacket material:
-
Polyvinyl chloride (PVC)
-
Nominal attenuation:
-
100MHz~450MHz -2.44--5.099dB
450MHz~8100MHz -5.094~32.906dB
-
Product colour:
The colour e.g. red, blue, green, black, white.
-
Red, Black
-
Conductor material:
-
Tinned copper
-
Bandwidth:
Bandwidth is the difference between the upper and lower frequencies in a continuous set of frequencies. It is typically measured in Hertz (Hz). A key characteristic of bandwidth is that any band of a given width can carry the same amount of information, regardless of where that band is located in the frequency spectrum. For example, a 3 kHz band can carry a telephone conversation whether that band is at baseband (as in a POTS telephone line) or modulated to some higher frequency.
-
8100 MHz
-
Maximum refresh rate:
-
60 Hz
-
Data transfer rate:
Rate at which data can be transferred. Usually expressed in units per second. May vary with network configurations.
-
4.95 Gbit/s
-
Supported video modes:
The video modes that can be displayed by the device.
-
1080p
-
Maximum resolution:
The maximum number of pixels that can be displayed in the image. It is usually quoted as width × height,: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels.
-
1920 x 1200
-
HDMI version:
-
1.3
-
Connector contacts plating:
What the connector contacts are covered with (layer on top).
-
Nickel
-
Connector 2 form factor:
-
Straight
-
Connector 1 form factor:
-
Straight
-
Connector 2 gender:
The gender of the second connector of the product. Each half of a pair of mating connectors is assigned the designation male or female, the indented one or the one fitting around the other being called female.
-
Male
-
Connector 1 gender:
The gender of the first connector of the product. Each half of a pair of mating connectors is assigned the designation male or female, the part bearing one or which fits into another being called male.
-
Male
-
Connector 2:
This is the second connector in the device.
-
VGA (D-Sub)
-
Connector 1:
This is the first connector in the device.
-
HDMI + USB
-
Cable length:
How long the cable is.
-
3 m