Power cable Logo 230V CEE7 (plug) to IEC C13, 3 m, model 24128

Logo power cable 230V CEE7 (plug) to IEC C13, 3 m, model 24128 is a single-phase mains lead designed to connect desktop computers, monitors, printers and other IT or AV devices with an IEC C13 inlet to a standard 230V wall socket. The 3 metre length provides extended reach for flexible equipment placement in home and office environments. The cable features a CEE7 (Schuko-style) mains plug on one end and a female IEC C13 connector on the other, with flexible PVC insulation for everyday power delivery.

Advantages

This power cable offers a standardized connection between 230V mains outlets and equipment with IEC C13 inlets, ensuring compatibility with most PCs, monitors, printers and small AV devices. The 3 m length reduces the need for additional extension leads while allowing convenient routing behind desks or cabinets. Flexible PVC insulation protects conductors and simplifies cable management, and the widely used IEC C13 connector provides secure, keyed insertion into compatible IEC inlets.

Suitable for

• Connecting desktop computers and workstations to mains power
• Powering monitors and small form-factor displays
• Supplying power to printers, scanners and multifunction devices
• Connecting audio-visual equipment such as amplifiers and receivers with C13 inlets
• Home offices, corporate offices, classrooms and server rooms with standard 230V outlets

Key specifications

• Length: 3 metres
• Input connector: CEE7 (Schuko-style) 230V mains plug
• Output connector: IEC C13 female
• Conductor type: single-phase AC power conductor(s)
• Insulation: flexible PVC
• Intended voltage: 230V AC

How to use

Ensure the device to be powered is switched off and located near a compatible 230V mains outlet. Insert the IEC C13 connector into the device's inlet until it seats securely. Plug the CEE7 mains plug into a properly grounded 230V socket. Avoid forcing connectors; they should engage smoothly. After connection, switch on the mains supply and then power up the connected device. To disconnect, power down the device, switch off the mains outlet if possible, then remove the plug and the C13 connector by pulling the body of each connector rather than the cable.

Usage recommendations

Use the cable in dry, indoor environments and avoid permanent installation in ceilings or within walls. Do not exceed the intended 230V single-phase rating and avoid sharp bends or heavy strains at connector ends. Inspect the cable periodically for damage and replace it if the insulation or connectors are compromised. For critical equipment, consider using surge protection or an uninterruptible power supply in addition to the standard power lead.