Cutting Disc for Angle Grinder 125 x 1.6 mm for Steel/Inox, LOGO-Tools 10.116

LOGO-Tools cutting disc 125 x 1.6 mm is designed for use with standard 125 mm angle grinders and is intended for cutting steel and stainless steel (inox). With a 1.6 mm thickness, the disc offers narrow kerf cuts that minimise material loss and allow accurate, controlled cutting of pipes, profiles and sheet metal in workshop and construction environments. The disc is suitable for tasks that require a balance of cutting speed and precision on ferrous and stainless metals.

Advantages

The thin 1.6 mm cutting edge reduces the width of the cut, improving material yield and allowing more precise alignment when cutting. The product is formulated to provide a consistent cutting performance on both steel and inox, helping to reduce sparks and heat generation relative to thicker, slower discs. Its 125 mm diameter makes it compatible with a wide range of handheld angle grinders used in professional and DIY metalworking.

Suitable for

• Cutting steel pipes and tubes
• Trimming metal profiles and angle iron
• Separating sheet metal panels and plates
• On-site construction cutting and workshop fabrication

Key specifications

• Diameter: 125 mm
• Thickness: 1.6 mm (thin cutting disc for narrow kerf)
• Material suitability: steel and stainless steel (inox)
• Intended tool: 125 mm angle grinder
• Typical application: manual metal cutting (pipes, profiles, sheet metal)

How to use

Mount the cutting disc on a compatible 125 mm angle grinder following the tool manufacturer's instructions and ensure the disc's rotation direction matches the grinder arrow. Secure the workpiece, wear appropriate personal protective equipment including eye and hearing protection and gloves, and perform steady, controlled cuts without excessive lateral pressure. Allow the disc to cut at its own rate to avoid overheating; pause periodically on long cuts to reduce heat build-up.

Usage recommendations

For safe and effective results, use the disc only for cutting tasks on steel and stainless steel. Check the angle grinder's maximum RPM and ensure it matches the disc's rating. Replace the disc if it shows signs of cracking, excessive wear, or imbalance. Store discs flat in a dry place to prevent damage.