IP camera LTC LXKAM34 E27 PTZ 3 MP, 230 V bulb-style

LTC LXKAM34 E27 PTZ 3 MP is a bulb-style IP camera designed for continuous mains operation at 230 V. The device fits into a standard E27 socket and integrates pan/tilt/zoom (PTZ) control, a 3-megapixel sensor and network streaming to provide clear video for indoor or sheltered outdoor monitoring of homes, offices and retail spaces. The camera supports remote live view, two-way audio and local recording to a microSD card, making it suitable for everyday surveillance where a discreet, powered solution is required.

Advantages

The camera offers 3 MP resolution for sharp image detail while keeping storage needs reasonable through efficient compression. PTZ functionality enables remote adjustment of viewing angle and digital zoom to monitor larger areas from a single installation. A built-in microphone and speaker provide two-way audio for real-time interaction. Continuous power via the 230 V E27 socket eliminates the need for separate power adapters and supports stable, long-term operation. Local storage via microSD (up to 128 GB) permits recording without external NVRs or cloud subscriptions.

Suitable for

• Home interior monitoring (living room, hallway, nursery)
• Small offices and reception areas
• Retail spaces and small shops under shelter
• Temporary or retrofit installations where E27 power is available

Key specifications

• Image sensor resolution: 3 megapixels
• Form factor: bulb-style housing compatible with E27 socket
• Power: mains 230 V via E27 socket
• Pan/Tilt/Zoom: remote PTZ control with digital zoom
• Audio: built-in microphone and speaker for two-way communication
• Local storage: microSD card support, up to 128 GB
• Network: IP camera streaming over local network (Wi‑Fi or wired as supported by device)
• Night mode: low-light recording capability for after-dark monitoring

How to use

Install the camera into a compatible E27 socket providing 230 V mains power, ensuring the location is sheltered from direct weather if used outdoors. Connect the camera to the local network using the supported method (Wi‑Fi or wired) and install the recommended mobile application (SmartLife or Tuya) to pair the device with your account. Use the app to perform initial setup, adjust PTZ position, configure image settings and enable motion detection. Insert a microSD card (max 128 GB) for local recording and check that two-way audio functions correctly through the app.

Usage recommendations

Place the camera in an E27 socket at a height and orientation that provides unobstructed coverage of the monitored area. For reliable remote access and smooth live view, ensure a stable network connection and position the camera within good Wi‑Fi signal range or use wired networking where available. Regularly verify recordings on the microSD card and back up important footage to external storage if required. Disable exposure to direct water or extreme temperatures; use the device in sheltered outdoor locations only.