LED bulb Lucide 49029/01/31 — LED lamp, single unit

Lucide 49029/01/31 is a single-unit LED lamp designed for general lighting in fixtures compatible with G4 bases. The lamp provides warm white light at 2700 K with an output of approximately 150 lumens while consuming 1.5 W at 12 V. Its compact dimensions make it suitable for use in small luminaires and decorative fittings where a low-profile, energy-efficient light source is required. The product is intended as a direct replacement for conventional G4 bulbs in both residential and commercial environments.

Advantages

The Lucide LED bulb delivers a high-efficiency light source with low power consumption and a long expected operating lifetime compared with traditional halogen G4 lamps. Its warm 2700 K colour temperature reproduces a comfortable, neutral-to-warm white light appropriate for ambient and accent lighting. The compact form factor and small diameter allow installation in confined fixtures. The lamp operates on 12 V and is suitable for low-voltage lighting systems.

Suitable for

• Under-cabinet and display lighting in kitchens and retail environments
• Accent and task lighting in residential rooms and hospitality settings
• Small decorative fixtures, chandeliers, and recessed pods designed for G4 lamps
• Low-voltage 12 V lighting systems and transformer-fed fittings

Key specifications

• Light source type: G4 LED
• Power consumption: 1.5 W
• Operating voltage: 12 V
• Luminous flux: 150 lm
• Colour temperature: 2700 K (warm white)
• Dimmable: No
• Approximate dimensions: 0.9 cm diameter; length ~3.8 cm

How to use

Ensure the fixture and transformer (if used) are compatible with G4 LED lamps and supply 12 V DC or AC as required by the luminaire. Switch off power before replacing the existing bulb. Insert the Lucide 49029/01/31 into the G4 socket with steady pressure until seated. Restore power and verify correct operation. Do not force the lamp into incompatible sockets or fittings.

Usage recommendations

Use this LED lamp in fixtures rated for G4 lamps and low-voltage operation. Avoid use in fully enclosed fixtures where heat cannot dissipate unless the fixture manufacturer specifies LED compatibility. This lamp is not suitable for applications requiring dimming.