Dome IP security camera Lupus-Electronics LE 338HD — 1984×1225 CMOS, 2.7–12 mm, 60 fps, ceiling mount, 0.05 lx

The Lupus-Electronics LE 338HD is a ceiling-mounted dome IP security camera with a 1984×1225 CMOS sensor and a 2.7–12 mm varifocal lens. It captures up to 60 frames per second and is designed for indoor surveillance in halls, offices and retail environments. The camera is optimized for low-light operation down to 0.05 lx and comes in a white housing suitable for discreet ceiling installation. It does not include an Ethernet LAN port and offers a maximum operating distance of 300 m.

Advantages

The LE 338HD combines a high-resolution 1984×1225 sensor and a varifocal 2.7–12 mm lens to provide adjustable field of view and clear image capture at up to 60 fps. Its low-light sensitivity (0.05 lx) enables monitoring in dim indoor environments without additional illumination. The dome design and white finish are intended for ceiling installation and reduce visual intrusion while maintaining a professional appearance. The camera’s specifications are aligned with common indoor surveillance use cases such as corridors, retail floors and office spaces.

Suitable for

• Indoor ceiling surveillance in halls and corridors
• Office monitoring and reception areas
• Retail floors, small shops and point-of-sale oversight
• Areas requiring adjustable field of view using a varifocal lens

When it may not be suitable

This camera is intended for indoor ceiling-mounted installations and may not be suitable where outdoor weatherproofing, built-in Ethernet LAN connectivity or PoE network power are required. Environments that demand integrated wired network ports or outdoor-rated housings will need a different model.

Key specifications

• Image sensor resolution: 1984×1225 CMOS
• Lens: 2.7–12 mm varifocal
• Maximum frame rate: 60 fps
• Mounting type: Ceiling (dome form factor)
• Minimum illumination: 0.05 lx
• Product colour: White
• Maximum operating distance: 300 m

How to use

Mount the camera on a stable ceiling surface, ensuring the dome housing has a clear view of the monitored area. Adjust the 2.7–12 mm varifocal lens to set the desired field of view and focus according to the coverage needed. Connect the camera to the chosen surveillance system following the manufacturer’s installation guide; note that this model does not provide an Ethernet LAN port and requires compatible connectivity or cabling solutions. Verify image orientation, exposure and frame rate settings in the recorder or camera interface and test low-light performance in the intended location.

What to consider before purchase

• Intended mounting location is indoor ceiling — check ceiling type and load capacity
• Verify that lack of Ethernet LAN matches your network and power infrastructure
• Confirm required field of view and coverage compatible with a 2.7–12 mm varifocal lens
• Assess low-light needs to ensure 0.05 lx sensitivity meets site illumination

Usage recommendations

Place the camera where it has an unobstructed view and allow for lens adjustment during commissioning. For consistent image quality, configure the recorder or camera software to match the 60 fps capability and test performance under the site’s typical lighting conditions.