Diamond Cutting Blade Makita 115 x 2.2 x 22.23 mm Turbo for Angle Grinder

Diamond Cutting Blade Makita 115 x 2.2 x 22.23 mm Turbo for Angle Grinder is a purpose-designed cutting disc for handheld angle grinders with a 22.23 mm arbor. The turbo rim profile combines a continuous diamond edge with serrated segments to balance cutting speed and surface finish. This blade is intended for cutting hard building materials such as concrete, natural stone, ceramic tile and general masonry where fast penetration and effective debris removal are required.

Advantages

The turbo rim geometry provides accelerated cutting progress while maintaining control over chipping on fragile surfaces. A 2.2 mm blade thickness offers a compromise between rigidity and minimal material loss, resulting in efficient cuts and reduced effort. The blade is manufactured to fit standard 115 mm (4.5 inch) angle grinders with a 22.23 mm arbor and is compatible with common construction and renovation workflows.

Suitable for

• Cutting concrete and reinforced concrete (non-structural, shallow cuts)
• Trimming and cutting natural stone and slate
• Tile and ceramic cutting for floor and wall installations
• Masonry block and brick cutting for renovation and repair

Key specifications

• Blade diameter: 115 mm
• Blade thickness: 2.2 mm
• Arbor bore diameter: 22.23 mm
• Rim type: Turbo (serrated/vented diamond rim)
• Intended materials: concrete, stone, tile, masonry

How to use

Securely mount the blade on a compatible 115 mm angle grinder with a 22.23 mm arbor, following the tool manufacturer’s instructions and ensuring the wheel guard is correctly installed. Allow the grinder to reach full speed before engaging the cutting surface and use steady, moderate feed pressure; avoid forcing the blade. For best results, use continuous motion along the cut line and allow the blade to cool between long cuts to prevent overheating. Wear appropriate personal protective equipment including eye protection, hearing protection, gloves and a dust mask.

Usage recommendations

Use water suppression or a dust extraction system when cutting materials that generate fine dust. Inspect the blade for visible damage before each use and replace if segments are worn or the bond is compromised. Match blade RPM rating with the grinder’s maximum speed and select the correct cutting technique for the material—shallow passes for reinforced concrete, steady continuous cuts for tile and stone.