Band saw blade Makita 1911A1-3 — 10 inch, 1/4 inch (0.25") width, 60 teeth

Replacement band saw blade Makita 1911A1-3 is intended for 10-inch band saws and has a cutting width of 1/4 inch (0.25") with 60 teeth. The blade is designed for medium-fine cutting of wood and other soft materials commonly used in workshops and light fabrication. Consistent tooth spacing and a medium-fine tooth count provide improved feed control and smoother cut surfaces compared with coarser blades, making it suitable for joinery and detail work on a 10" machine.

Advantages

The 1/4 inch width balances flexibility and stability for common resawing and contour cutting tasks on 10-inch band saws. Sixty teeth offer a compromise between cutting speed and surface finish, reducing tear-out on softer materials while maintaining acceptable feed rates. The blade’s tooth geometry and consistent spacing help maintain predictable cutting performance and easier tracking on compatible tires and guides.

Suitable for

• General-purpose woodworking on 10" band saws
• Joinery and production of finer profiles
• Resawing thin panels and trimming workpieces
• Light fabrication and hobby workshop use

Key specifications

• Designed for 10-inch band saws
• Blade width: 1/4 inch (0.25")
• Tooth count: 60 teeth (medium-fine)
• Material suitability: wood and soft materials
• Intended use: general-purpose cutting, resawing, detail work

How to use

Install the blade following the band saw manufacturer's instructions for blade tension, tracking, and guide adjustment. Ensure the blade is mounted with the teeth pointing in the correct cutting direction and set proper tension for a 1/4" blade on your 10" machine. Adjust blade guides and bearings to minimize lateral play and verify tracking by rotating the wheels by hand before powering the saw. Feed workpieces at a steady rate appropriate to the material and tooth count; reduce feed speed for tighter curves or finer finishes.

Usage recommendations

For best results, use appropriate blade tension and regularly check guide alignment and blade sharpness. Select this 1/4"–60T blade for projects requiring smoother finishes on wood and soft materials; choose a coarser or finer tooth pattern if your work demands faster stock removal or ultra-fine finishing. Maintain recommended feed rates and keep the blade clean of pitch and debris to extend service life.