Power Cutter Makita 4100KB

The Power Cutter Makita 4100KB is a compact electric cutting tool designed for general-purpose cutting tasks. It delivers a high idle speed of 12,200 RPM and a cutting capacity of 40 mm, driven by a 1,400 W motor supplied from a 230 V AC mains source. The tool's compact footprint — approximately 231 mm wide, 220 mm deep and 179 mm high — and a 2.5 m power cable provide convenient maneuverability and placement for workshop or on-site use.

Advantages

The Makita 4100KB combines a powerful 1,400 W motor with a high no-load speed to enable smooth, consistent cutting across a range of materials. Its 40 mm cutting capacity supports common tasks while the compact dimensions and moderate weight contribute to easier handling and storage. A 2.5 m cable length allows reasonable reach from power outlets without immediate need for an extension cord. The tool's layout and controls are arranged for straightforward operation and maintenance.

Suitable for

• Cutting wood panels, boards and trims
• Trimming laminate and parquet flooring
• Small renovation and carpentry tasks
• Workshop repetitive cuts where a compact electric cutter is preferred

Key specifications

• Motor power: 1,400 W
• No-load speed: 12,200 RPM
• Maximum cutting depth: 40 mm
• Supply voltage: 230 V AC
• Cable length: 2.5 m
• Dimensions (W×D×H): approx. 231 × 220 × 179 mm

How to use

Before use, inspect the cutting blade and ensure it is compatible and securely mounted. Connect the tool to a properly rated 230 V AC outlet and confirm the power cable is routed safely away from the cutting zone. Position the workpiece on a stable support and set the cutting depth to suit the material thickness. Switch the tool on, allow it to reach full speed, then guide the cutter steadily through the material using consistent feed pressure. After completing the cut, switch off the tool and wait for the blade to stop before setting the tool down or making adjustments.

Usage recommendations

Use appropriate personal protective equipment (safety glasses, hearing protection and dust mask) and select a blade suited to the material being cut. Maintain a firm grip and keep hands clear of the blade. Regularly check the tool for wear and secure fastenings, and follow the manufacturer's instructions for blade replacement and maintenance.