Drill bit Makita B-11695 6 mm 260 mm

The Makita B-11695 6 mm x 260 mm drill bit is a single-piece SDS-plus-compatible accessory designed for use with rotary hammers. Engineered for drilling into concrete and masonry, this 6 mm diameter, 260 mm length bit provides a balance of reach and control for medium-depth holes. The bit's hardened construction and optimized flute geometry deliver stable drilling performance and improved debris evacuation compared with generic bits, making it suitable for both professional and home workshop applications.

Advantages

The drill bit offers consistent concentricity and wear resistance through heat-treated steel and precise manufacturing tolerances. Its extended 260 mm length increases working depth without sacrificing rigidity, while the 6 mm diameter supports common anchor, dowel and rebar-starting hole sizes. The flute design facilitates effective dust removal, reducing clogging and maintaining drilling speed in masonry and concrete substrates.

Suitable for

• Drilling holes in concrete and masonry for anchors and dowels
• Creating pilot holes for light-duty anchors and fixtures
• Renovation and construction tasks requiring medium-depth holes

Key specifications

• Diameter: 6 mm
• Overall length: 260 mm
• Shank type: SDS-plus compatible single-piece shank
• Material: heat-treated high-speed/hardened steel for masonry drilling
• Flute design: spiral flute for efficient dust removal

How to use

Install the bit into the rotary hammer according to the tool manufacturer's instructions until it locks securely in the chuck. Position the bit at the chosen drilling point, apply steady axial pressure and operate the hammer in rotary-hammer (hammer) mode for masonry. Begin at low speed to establish the hole, then increase pressure and maintain a consistent drilling rhythm. Withdraw the bit periodically to clear debris and allow the flute to evacuate dust for continued cutting efficiency.

Usage recommendations

Use appropriate personal protective equipment including safety glasses, hearing protection and dust mask when drilling. Match drill speed and pressure to the substrate hardness; excessive side pressure can shorten bit life. For long continuous drilling, periodically retract the bit to remove accumulated dust and allow cooling. Store the bit in a dry place and inspect for wear or damage before use.