Drill Bit SDS‑MAX Makita 32 x 1360 x 1500 mm B-30265, 6‑cut Maxi

SDS‑MAX Drill Bit Makita 32 x 1360 x 1500 mm B-30265, 6‑cut Maxi is a long-reach concrete and masonry drill designed for SDS‑MAX rotary hammers. With a 32 mm diameter and a 1360 mm working length, this bit provides extended reach for through-holes, core starter holes and deep anchoring in construction and renovation projects. The 6‑cut Maxi tip geometry enhances cutting efficiency and debris evacuation to maintain drilling speed in dense aggregate and reinforced concrete.

Advantages

The 6‑cut Maxi carbide tip reduces vibration and optimizes cut per revolution for improved penetration in concrete and masonry. The SDS‑MAX shank ensures secure retention and fast bit changes with compatible rotary hammers. A long 1360 mm working length allows deep or long-reach drilling without coupling extensions, while the overall 1500 mm length provides clearance and handling room on site. The bit construction is selected to withstand the high-impact forces of demolition and heavy-duty drilling.

Suitable for

• Drilling through concrete walls and floors
• Creating deep anchor or rebar clearance holes
• Long-reach drilling in renovation and construction sites
• Heavy demolition where durable, high-impact bits are required

Key specifications

• Diameter: 32 mm
• Working length: 1360 mm
• Total length: 1500 mm
• Shank type: SDS‑MAX
• Tip design: 6‑cut Maxi carbide tip
• Material suitability: concrete and masonry (including reinforced concrete)

How to use

Fit the SDS‑MAX shank securely into the compatible rotary hammer following the tool manufacturer's instructions. Mark the drilling location, start at low speed to establish a guide and then apply steady pressure while permitting the hammer action to perform the cutting. Periodically withdraw the bit to clear dust and debris, especially when drilling deep holes, to maintain cutting efficiency and avoid overheating. Use appropriate personal protective equipment such as eye protection, hearing protection and dust control measures.

Usage recommendations

For best results in reinforced or hard concrete, select a rotary hammer with adequate impact energy and speed range for a 32 mm SDS‑MAX bit. When drilling long depths, use controlled feed pressure and regular withdrawal to evacuate chips. Replace the bit when carbide wear reduces cutting performance to prevent excessive tool stress.