Circular Saw Makita MAKFORCE WOOD B-32172 — 270 mm blade, 30 mm bore, 24 teeth

Makita MAKFORCE WOOD B-32172 is a 270 mm circular saw blade designed for cutting wood and wood-based materials. With a 30 mm bore and 24 teeth, the blade is intended for use in hand-held circular saws and table-mounted machines that accept this diameter. The tooth geometry and count are tuned for a balance between clean crosscuts and efficient rip cuts, making it suitable for a broad range of carpentry and joinery tasks as well as renovation and precision woodworking.

Advantages

The 270 mm diameter provides a deep cutting capacity for common construction and woodworking tasks while the 24-tooth configuration reduces tear-out on crosscuts and maintains good cutting speed on rip cuts. The 30 mm bore fits many standard saw arbors, allowing straightforward installation. The blade’s design aims at stable, consistent performance on pine, softwood, plywood, MDF and similar wood-based panels.

Suitable for

• Crosscutting and rip cutting of solid wood and timber boards
• Cutting plywood, particleboard and MDF in joinery and furniture making
• On-site renovation and carpentry where hand-held or table-mounted saws are used
• Precision woodworking tasks that require reasonably clean edges without extensive finishing

When it may not be suitable

This blade is optimized for wood and wood-based materials and is not intended for cutting metals, masonry, or reinforced concrete. For very fine finishing cuts on delicate veneers or laminates, a blade with a higher tooth count and a finer tooth geometry may achieve better results. Similarly, for aggressive ripping of large hardwood timbers, a dedicated rip blade with fewer, larger teeth could be more efficient.

Key specifications

• Blade diameter: 270 mm
• Bore diameter: 30 mm
• Number of teeth: 24
• Material application: wood and wood-based panels (plywood, MDF, particleboard)
• Typical use: hand-held and table-mounted circular saws

How to use

Ensure the saw and blade are compatible in diameter and bore before installation. Disconnect power and follow the saw manufacturer’s instructions to mount the blade, observing correct blade rotation direction. Tighten the arbor flange securely and check blade runout before cutting. Use appropriate feed rate and support the workpiece to minimize vibration. Wear eye, hearing and respiratory protection as required, and use a push stick or other safety devices when working close to the blade.

What to consider before purchase

• Verify your saw accepts a 270 mm blade with a 30 mm bore
• Confirm the 24-tooth configuration matches the finish and cut speed you need
• Check compatibility with the materials you plan to cut (wood, plywood, MDF, particleboard)
• Consider whether anti-vibration, anti-kickback features or a different tooth count are required for specialized tasks

Usage recommendations

For best results, use the Makita MAKFORCE WOOD 270 mm blade at the recommended RPM range for your saw, allow the blade to reach full speed before feeding the workpiece, and perform test cuts on scrap material to set depth and feed. Regularly inspect and maintain the blade—clean resin build-up and replace the blade when teeth become worn or damaged to preserve cutting quality.