Rotary Hammer Makita HR2811FT

The Makita HR2811FT rotary hammer is an SDS-plus tool positioned between the HR2470 and HR3200C series. It offers an 800 W motor, up to 1,100 rpm no-load speed and an impact energy of 2.9 J with 4,500 bpm, providing efficient drilling and chiseling performance in a compact 345 mm body weighing 3.3 kg.

Advantages

Double insulation enhances user safety while variable speed and a reversing function provide control and versatility for different tasks. A torque limiter stops the tool when the bit encounters reinforcement, reducing bit breakage and operator effort. Improved dust collection and an LED job light increase visibility and cleanliness at the worksite.

Suitable for

• Drilling in concrete, masonry and brick with SDS-plus bits
• Light chiseling and removal of tiles or plaster
• Installation tasks requiring controlled drilling speed and torque
• Professional tradespeople and advanced DIY users

Key specifications

• Brand: Makita
• Model: HR2811FT
• Power input: 800 W
• No-load speed: up to 1,100 rpm
• Impact energy: 2.9 J
• Blows per minute: 4,500 bpm
• Chuck type: SDS-plus
• Length: 345 mm
• Weight: 3.3 kg
• Features: double insulation, variable speed, reversing function, torque limiter, improved dust collection, LED work light
• MPN: HR2811FT
• EAN: 0088381083898

How to use

Select an appropriate SDS-plus bit for the material and insert it into the chuck until it locks. Choose the required mode (drill, hammer drill or chisel) and set the variable speed according to the task. Apply steady pressure while drilling; avoid forcing the tool. Use the reversing function to remove stuck bits. Activate the torque limiter will stop the tool if the bit contacts reinforcement. Keep the dust collection system engaged during drilling and use the LED job light to improve visibility.

Usage recommendations

For safe and effective operation, wear appropriate personal protective equipment (eye and ear protection, dust mask and gloves). Use SDS-plus bits in good condition and check attachments before use. Do not exceed recommended drilling diameters for the tool; allow the motor to cool during extended use. Regularly clean or replace dust collection elements to maintain performance.