Mitre Saw Makita LH1040F

The Makita LH1040F mitre saw is a corded power tool designed for accurate crosscuts and bevel cuts in woodworking. It is driven by a 1650 W motor with a maximum idle speed of 4800 RPM, enabling steady cutting performance across a range of timber and board thicknesses. The unit has compact external dimensions of 476 mm (width) × 530 mm (depth) × 535 mm (height) and uses a 160 mm diameter blade. Sound pressure during operation measures 92 dB and the saw is intended for AC mains use.

Advantages

The 1650 W motor provides consistent torque for repetitive cutting tasks while the 4800 RPM maximum speed helps maintain clean cut edges. Compact overall dimensions make the saw easier to position on a workbench or in a small workshop. The specified cutting capacities — 35 × 130 mm at a 45° mitre and 69 × 130 mm at a 45° incline — cover common crosscut and bevel needs in joinery and trim work. The corded AC design eliminates battery runtime concerns, offering continuous operation for longer jobs.

Suitable for (tasks / use cases)

• Crosscutting and mitre joints for skirting boards, architrave and mouldings
• Bevel cuts and compound mitres for door frames and window casings
• Trimming and resizing timber planks and softwood or hardwood boards
• Workshop and on-site carpentry where mains power is available

Key specifications

• Motor power: 1650 W
• Maximum idle speed: 4800 RPM
• Blade diameter: 160 mm
• Cutting capacity at 45° mitre: 35 × 130 mm
• Cutting capacity at 45° incline: 69 × 130 mm
• Sound pressure level: 92 dB
• Power supply: AC mains
• Dimensions (W × D × H): 476 × 530 × 535 mm

How to use

Secure the saw on a stable surface or workbench and ensure the power cable is suitable for the working area. Fit a blade rated for the saw's 160 mm diameter and tighten according to the manufacturer's instructions. Mark the workpiece and set the mitre and bevel angles using the saw's angle scales. Start the motor, allow it to reach full speed, then feed the blade into the timber with steady, controlled motion until the cut is complete. Always allow the blade to stop fully before withdrawing the workpiece or making adjustments.

Usage recommendations

Use appropriate personal protective equipment including eye and hearing protection. Verify blade condition and secure workpieces with clamps where possible. Observe the 92 dB sound pressure level and consider additional hearing protection for prolonged use. For best results with hardwoods, use a blade suited to harder materials and reduce feed speed to prevent burning.