Sanding sheet Coarse grit Makita P-43533

The Makita P-43533 sanding sheet Coarse grit is a pack of 10 coarse P40 abrasive sheets sized 125 mm x 125 mm designed for manual sanding tasks. These sheets are intended for aggressive material removal, rapid leveling of rough surfaces and initial preparation of wood, composite and painted surfaces prior to finer sanding or finishing. The format and grit make them suitable for use with hand blocks or by hand on large flat areas where a coarse cut is required.

Advantages

Coarse P40 abrasive provides fast stock removal and efficient shaping of uneven surfaces. The 125 mm x 125 mm size fits common sanding blocks and is easy to handle for manual operation. The sheets are supplied in a pack of 10, allowing multiple work cycles before repurchasing. The abrasive is designed for durability during aggressive sanding and offers consistent cutting performance across the sheet.

Suitable for

• Rapid removal of old paint, varnish and coatings
• Shaping and leveling rough timber and boards
• Preparing surfaces for subsequent medium and fine sanding
• Removing rust from metal surfaces as a first coarse step

Key specifications

• Abrasive grit: coarse P40
• Sheet size: 125 mm x 125 mm
• Quantity: 10 sheets per pack
• Intended use: manual sanding with hand block or by hand
• Suitable materials: wood, painted surfaces, composites, initial rust removal on metal

How to use

Select an appropriate sanding block or hold the sheet firmly by hand for flat surfaces. Use steady, even strokes along the grain on wood or across painted surfaces when removing coating layers. Apply moderate pressure for initial passes to achieve material removal; reduce pressure as the surface evens out. Replace the sheet when abrasive performance decreases or clogging becomes excessive to maintain consistent results.

Usage recommendations

For best results, start sanding with the P40 coarse sheet to remove bulk material, then progress to finer grits for smoothing and finishing. Use personal protective equipment such as a dust mask and eye protection when sanding. When working on metal, follow with a finer abrasive and appropriate rust treatment or primer before painting.