Cutting/Grinding Disc MAR-POL 125 mm with Velcro M14 x 2 mm (08500)

MAR-POL 125 mm cutting and grinding disc with hook-and-loop attachment and M14 x 2 mm thread is a universal abrasive accessory intended for use on angle grinders and polishing machines that accept 125 mm discs and an M14 arbor. The disc is designed to perform cutting, grinding and surface preparation tasks on metal and other compatible materials in workshops, construction and renovation settings. The hook-and-loop (Velcro) fastening simplifies mounting and replacement on backing pads, while the standard threaded centre ensures secure attachment to tools with the M14 x 2 mm spindle.

Advantages

The disc combines cutting and grinding capabilities in a single accessory, reducing the need to change discs for different stages of work. The hook-and-loop attachment provides fast and tool-free replacement on compatible backing pads. The standardized M14 x 2 mm threaded hole guarantees compatibility with a wide range of angle grinders and polishing machines. The 125 mm diameter balances reach and control, making it suitable for both confined spaces and larger surface areas.

Suitable for

• Cutting thin metal sheets and profiles
• Grinding welds, edges and burrs on metalwork
• Surface preparation before painting or coating
• Light shaping and deburring of non-ferrous materials

Key specifications

• Disc diameter: 125 mm
• Attachment type: hook-and-loop (Velcro)
• Arbor/thread compatibility: M14 x 2 mm
• Intended tool: angle grinders and polishing machines compatible with 125 mm discs
• Primary applications: cutting, grinding and surface preparation on metal and compatible materials

How to use

Ensure the angle grinder or polishing machine is disconnected from power before fitting the disc. Mount the disc onto a compatible backing pad with a hook-and-loop surface, aligning the centre hole with the spindle and securing it using the machine's flange and nut; verify the M14 x 2 mm thread engagement if applicable. After installation, check that the disc is seated evenly and free of damage. Start the tool at low speed to confirm stability before resuming normal working speed. Use steady pressure and appropriate feed direction for cutting or grinding operations, avoiding side loads that exceed the disc's intended use. Wear suitable personal protective equipment, including eye protection, gloves and hearing protection.

Usage recommendations

For best results, match the disc grit and hardness to the material and task, maintain correct tool speed per machine specifications, and replace the disc if signs of wear, cracking or uneven performance appear. Store discs in a dry, cool place away from direct sunlight and avoid bending or dropping the product prior to use.