Speaker cable Maxcable TLYp CCA 2x0.75 mm — 100 m reel

Maxcable TLYp CCA 2x0.75 mm speaker cable on a 100 m reel is designed for wired audio connections in home and commercial sound systems. The twin-core construction with copper-clad aluminum (CCA) conductors provides a balance between conductivity and affordability suitable for low-voltage speaker lines. The cable’s dimensions and flexible sheath allow for in-wall routing, surface mounting, and neat terminations to amplifiers and passive speakers.

Advantages

The Maxcable TLYp CCA speaker cable combines lightweight CCA conductors with a compact 2x0.75 mm cross-section to offer reliable signal transmission for short to moderate cable runs. Supplied on a 100 m reel, it simplifies long runs and bulk installations, reducing joins and potential points of failure. The cable sheath protects the conductors from mechanical damage while remaining flexible enough for bends and turns during installation.

Suitable for

• Connecting passive loudspeakers to amplifiers in home audio systems
• Background music and public address installations in shops, offices and restaurants
• Multi-room audio distribution where multiple runs are required
• In-wall or surface-mounted routing when local electrical codes permit CCA cable use

Key specifications

• Conductor type: copper-clad aluminum (CCA)
• Configuration: twin-core (2 conductors)
• Conductor cross-section: 0.75 mm² per conductor
• Length: 100 meters on reel
• Suitable voltage: low-voltage speaker lines
• Sheath: flexible outer insulation for routing and protection

How to use

Measure the required run length and cut the cable from the reel, allowing extra length for terminations. Strip a small portion of the outer sheath and the conductor insulation to expose the cores, taking care not to nick the conductors. Connect the conductors to the speaker and amplifier terminals following polarity marking to maintain correct phase. Secure the cable along the route using appropriate clips or conduits and avoid running parallel to mains power cables to reduce interference.

Usage recommendations

For best results, use this 2x0.75 mm CCA cable for short to moderate speaker runs and applications where cost-effective wiring is a priority. For long-distance runs, high-power systems, or critical audiophile setups, consider using larger cross-section or pure copper conductor cable to minimise voltage drop and preserve signal quality.