LED power supply mean well 96W 24V IP67 — constant voltage, outdoor-rated driver

Mean Well 96W 24V IP67 LED power supply provides a stable constant-voltage 24V output in a weather-resistant housing. Engineered for installations that require protection against moisture and dust, this outdoor-rated driver supports continuous LED operation for strips, signage, and low-voltage lighting circuits. The compact, sealed enclosure and thermal design allow reliable performance in exposed or damp environments while maintaining consistent voltage for connected LED loads.

Advantages

The unit delivers a regulated 24VDC output with 96 watts of power, minimizing flicker and voltage drop for long LED runs. Its IP67-rated enclosure ensures protection from dust and temporary immersion in water, reducing the need for additional enclosures in many outdoor or damp-location applications. Built with overcurrent, overvoltage and short-circuit protection, the driver supports safer installation and integration with LED systems. The robust mechanical design and corrosion-resistant finish improve durability in harsh conditions.

Suitable for

• LED strip lighting for exterior façades and under-cabinet wet areas
• Illuminated signage and channel letters
• Low-voltage architectural lighting and accent lighting
• Outdoor fixtures and damp-location installations requiring constant-voltage supply

Key specifications

• Output: 24V DC constant voltage
• Maximum output power: 96 W
• IP rating: IP67 (dust tight and protected against temporary immersion)
• Protections: overcurrent, overvoltage, short-circuit
• Suitable ambient conditions: outdoor and damp locations
• Enclosure: sealed, weather-resistant housing

How to use

Mount the power supply in a location that allows adequate heat dissipation and complies with local electrical codes. Connect the AC input to a properly rated supply and verify correct polarity on the 24V DC output before connecting LEDs. Secure all cable entries with appropriate glands or connectors to maintain the IP67 rating. After installation, perform a functional check with the LED load to confirm stable output voltage and correct operation of the lighting circuit.

Usage recommendations

For longest service life, avoid continuous operation at maximum ambient temperature and keep the load within 80–90% of rated power when possible. Use appropriately rated outdoor wiring and sealed connectors to preserve the IP67 protection. If the driver is placed in enclosed spaces, ensure sufficient thermal management to prevent overheating.