LED driver MEAN WELL HLG-150H-36B, 150 W output, 36 V, AC 90–305 V, IP20

MEAN WELL HLG-150H-36B is a 150 W LED driver providing a stable 36 V constant-voltage output with a maximum output current of 4.2 A. It accepts a wide AC input range of 90–305 V and incorporates power factor correction (PFC) and Mix mode operation (CV+CC) for reliable performance with LED panels, strips and other indoor lighting fixtures. The unit has compact dimensions (68 × 220 × 38.8 mm) and is designed for indoor installations with IP20 protection.

Advantages

The HLG-150H-36B offers a combination of constant-voltage performance and optional current-regulation behavior thanks to its Mix mode design, enabling compatibility with a variety of LED loads. Built-in PFC improves mains efficiency and reduces harmonic distortion. Its wide input voltage range makes it suitable for installations in regions with variable mains supply, while compact size allows integration into confined enclosures. The driver supports multiple dimming interfaces, enabling flexible control over connected lighting.

Suitable for

• Indoor LED panels and troffers that require a stable 36 V supply
• LED strip lighting installations for commercial and residential settings
• General indoor lighting projects where a 150 W driver with wide AC input is needed
• Applications requiring dimming via 1–10 V, PWM or resistance-based controls

Key specifications

• Output power: 150 W
• Output voltage: 36 V DC (constant-voltage)
• Maximum output current: 4.2 A
• Input voltage range: AC 90–305 V
• Operating mode: Mix mode (CV+CC) with built-in PFC
• Dimming interfaces: 1–10 V, PWM, resistance
• Ingress protection: IP20 (indoor use)
• Dimensions: 68 × 220 × 38.8 mm
• Cable output connection

How to use

Install the driver in a dry, well-ventilated indoor location maintaining safe clearances from heat sources and conductive surfaces. Connect the AC input to a suitable mains supply within the specified 90–305 V range, observing correct wiring and grounding practices. Connect the 36 V DC output to the LED load, ensuring the total connected load does not exceed 150 W or the 4.2 A current limit. If dimming is required, wire the 1–10 V, PWM or resistance dimming control according to the lighting control system documentation and verify compatibility with the LED fixtures.

Usage recommendations

For reliable operation, ensure the cumulative LED load remains within rated power and current limits and provide adequate ventilation around the driver. Avoid exposure to moisture and corrosive environments due to IP20 protection. When integrating dimming controls, perform compatibility checks and initial testing at reduced brightness to confirm correct response before full deployment.