USB extension cable MediaRange MRCS243 USB 3.2 Gen 1 (3.1 Gen 1) 10 m, 2× USB-A to USB-A, 5 Gbit/s, black

MediaRange MRCS243 is a 10 m USB extension cable that extends USB A connections while maintaining USB 3.2 Gen 1 (3.1 Gen 1) data rates up to 5 Gbit/s. The cable has two USB-A plugs on one end and a USB-A socket on the other, gold-plated contacts for corrosion resistance and reliable signal transmission, and a black jacket suitable for visible or concealed routing. It is designed to extend the reach of existing USB ports to peripherals such as external drives, hubs, printers and webcams where an active extension is required.

Advantages

The active design with an integrated repeater preserves signal integrity over the 10 m length, enabling high-speed transfers at up to 5 Gbit/s where the host and device support USB 3.2 Gen 1. Gold-plated connector contacts reduce corrosion and ensure stable electrical contact over repeated use. The cable is plug-and-play compatible with common operating systems, so no additional drivers are required for most setups.

Suitable for

• Extending connection to external hard drives and SSDs for data transfer or backup
• Connecting printers, scanners and other office peripherals positioned away from the host
• Providing additional reach for webcams and conferencing equipment in meeting rooms
• Linking USB hubs or docking stations when a longer physical connection is needed

When it may not be suitable

This cable is intended to extend USB-A connections and maintain USB 3.2 Gen 1 speeds; it does not change connector types or provide USB Power Delivery beyond standard USB-A limits. For devices that require higher USB power delivery, USB-C connectors, or USB 3.2 Gen 2/Gen 2x2 speeds, this cable will not meet those requirements. Also, end-to-end throughput depends on host and device capabilities—if either side is limited to USB 2.0 speeds, the overall transfer rate will be lower.

Key specifications

• Cable length: 10 m
• Connectors: 2 × USB-A (male) to 1 × USB-A (female)
• USB standard: USB 3.2 Gen 1 (3.1 Gen 1)
• Maximum data transfer rate: up to 5 Gbit/s
• Connector contacts: gold-plated
• Product colour: black

How to use

Connect the USB-A female end of the MediaRange MRCS243 to the device cable or peripheral you want to extend, then plug the pair of USB-A male connectors into the host computer’s USB ports as required by the cable’s design. The built-in repeater inside the cable automatically manages signal amplification—no configuration or drivers are normally needed. Ensure the host and peripheral support USB 3.2 Gen 1 to achieve the maximum transfer speed; otherwise the connection will operate at the maximum supported speed of the slower device.

What to consider before purchase

• Verify that both host and device support USB 3.2 Gen 1 (3.1 Gen 1) to benefit from 5 Gbit/s speeds
• Confirm that a USB-A to USB-A extension suits your hardware—this cable does not convert connector types
• Consider power requirements of the connected peripheral; the cable does not provide enhanced USB power delivery beyond standard USB-A capabilities
• Plan cable routing for a 10 m length and check for potential interference from nearby electrical equipment

Usage recommendations

For optimal performance, avoid sharp bends and heavy kinking along the 10 m length and keep the cable away from large electromagnetic sources. If you require continuous high-throughput transfers, connect both ends to ports that explicitly support USB 3.2 Gen 1 and test transfer speed after installation to confirm expected performance.