Hole saw set MEGA 11-piece for wood 19–64 mm (11 sizes) - model 26409

The MEGA 11-piece hole saw set for wood (model 26409) contains cutters with diameters from 19 mm to 64 mm designed to create clean, round holes in timber and other wood materials. The set groups multiple commonly used sizes in a single kit to support installations where precise circular openings are required, such as door hardware, plumbing, electrical boxes and joinery tasks. Components are arranged to offer a practical range of diameters so users can select the proper cutter for each job without switching between individual tools.

Advantages

The cutters in this MEGA set are manufactured for efficient chip removal and stable cutting in soft and hardwoods, reducing tear-out when used with appropriate pilot drills and speeds. The wide span of sizes from 19 mm to 64 mm eliminates the need to buy multiple single saws, providing versatility for professional and DIY use. The kit format simplifies storage and transport, ensuring that the most frequently needed hole diameters are available on site.

Suitable for

• Installing door hardware and locksets
• Cutting openings for recessed electrical boxes and conduit
• Creating holes for plumbing penetrations through wooden framing
• Carpentry tasks requiring precise circular cuts in timber and plywood

Key specifications

• Number of pieces: 11 cutters covering a range of diameters
• Diameter range: 19 mm to 64 mm (multiple sizes within this span)
• Intended material: wood and wood-based materials such as plywood and chipboard
• Compatibility: designed for use with standard hole saw arbors and drill drivers suitable for hole saw operation
• Typical use conditions: indoor and sheltered site work on timber framing and carpentry components

How to use

Select the cutter whose diameter matches the required opening and mount it on a compatible arbor or mandrel. Secure the arbor in a drill driver with sufficient power and set an appropriate speed for the wood type; start drilling with a pilot bit engaged to maintain center alignment. Apply steady, moderate pressure and allow the cutter to remove chips without forcing the tool; clear chips periodically if cutting deep holes. After cutting, withdraw the saw and remove the plug from the cutter following the manufacturer’s guidance to avoid damaging the teeth.

Usage recommendations

Use sharp pilot bits and match drill speed to the hardness of the wood to reduce tear-out. For larger diameters, use a drill with higher torque and consider backing the workpiece to support the exit side of the cut. Store cutters in a dry place and inspect teeth before each use to ensure clean, precise cutting.