Voltage Tester Screwdriver MEGA 5105905 with LCD display, 19 cm, 110–220 V

Voltage Tester Screwdriver MEGA 5105905 with LCD Display is a 190 mm handheld electrical tester designed to detect AC and DC voltage in the range of 110–250 V. The device features an LCD for clear readout and an additional AC voltage indicator. The insulated tip and plastic handle enable voltage detection through insulation up to 10 mm thick. This tester is intended to identify live (phase) and neutral conductors and to verify absence or presence of voltage on equipment neutrals and earth connections.

Advantages

The MEGA 5105905 provides both visual LCD readout and an AC voltage indicator for quick identification of voltage type. Its 190 mm length and insulated tip allow safe inductive testing through insulation up to 10 mm without direct contact. The plastic handle and tip cover improve user safety while making it suitable for locating wire breaks and distinguishing phase from neutral in installations above 110 V.

Suitable for

• Identifying phase and neutral conductors in residential and commercial wiring
• Checking presence or absence of voltage on equipment neutral and earth connections
• Locating wire breaks and faults on circuits above 110 V
• Non-contact inductive voltage detection through insulation up to 10 mm

Key specifications

• Model: MEGA 5105905
• Length: 190 mm
• Measurement range: 110–250 V AC/DC
• Display: LCD with additional AC voltage indicator
• Insulation testing capability: inductive detection through insulation up to 10 mm
• Tip and handle material: plastic
• EAN: 5903755105905

How to use

Hold the tester by the insulated handle and place the tip near the conductor or insulated wire to be tested. Read the voltage value on the LCD and observe the AC indicator for alternating current. For inductive testing through insulation, ensure the insulating layer does not exceed 10 mm thickness and position the tip close to the conductor. Use the device to distinguish phase from neutral and to verify whether neutral or earth points carry voltage.

Usage recommendations

Do not attempt direct contact with live conductors or remove insulation for testing. Use the tester only within its specified 110–250 V range and check the device visually for damage before each use. If uncertain about a measurement or when working on complex installations, consult a qualified electrician.