Trowel MEGA 61654 steel 270×130 mm with 10×10 mm teeth

Steel trowel MEGA 61654 with working dimensions 270×130 mm and 10×10 mm square notches is intended for applying and leveling adhesives, thinset mortars and similar materials where a notched pattern is required. The compact rectangular blade provides even distribution of adhesive and helps control layer thickness on small surfaces, edges and repair sites. Constructed from steel for rigidity and durability, the tool is suitable for both professional and DIY tiling and masonry tasks.

Advantages

The steel blade resists bending and maintains a uniform notch profile for consistent material application. The 10×10 mm square teeth create a predictable ridged surface that improves adhesive contact and bonding. Its compact 270×130 mm size makes the trowel easy to handle in confined areas and simplifies detailed work. The tool balances durability with manageable weight for repeated use during tiling and repair operations.

Suitable for

• Applying tile adhesive and thinset on small areas
• Point repairs and patching of mortar joints
• Edge work and trimming around fixtures
• Detail tiling in kitchens, bathrooms and stair niches

Key specifications

• Blade material: steel
• Working dimensions: 270 × 130 mm
• Notch shape: square
• Notch size: 10 × 10 mm
• Intended use: adhesive, thinset, mortar application and leveling

How to use

Ensure the substrate is clean, stable and prepared according to the adhesive manufacturer's instructions. Scoop the adhesive onto the surface and hold the trowel at an angle to spread the material evenly. Use the flat side for initial spreading if needed, then turn the notched edge and draw the trowel across the surface to create ridges of uniform height. Apply tiles or materials while the adhesive is still open to achieve proper bonding. Clean the trowel promptly after use to prevent material buildup and preserve notch shape.

Usage recommendations

For best results, match the 10×10 mm notch with the tile size and substrate requirements specified by the adhesive manufacturer. Use steady, even strokes and maintain the same trowel angle to ensure consistent adhesive thickness. Store the trowel dry and clean to prevent corrosion and check notch edges before reuse to confirm they are not worn.