Drill bit MEGA SDS+ 13 mm for concrete model 81335

MEGA SDS+ 13 mm for concrete model 81335 is a masonry drill bit designed for drilling holes in concrete, brick and similar hard building materials. The bit fits SDS+ rotary hammer chucks and offers a 13 mm drilling diameter for tasks that require reliable, repeatable hole making during construction, installation and repair work.

Advantages

The MEGA SDS+ 13 mm masonry bit provides a solid carbide tip geometry optimized for effective percussive drilling in concrete and masonry, ensuring consistent penetration and reduced walking. Its shank is manufactured to the SDS+ standard for secure engagement in compatible rotary hammers, delivering stable rotation and impact transfer. The drill bit is balanced for straight drilling and dimensional stability, which helps maintain accurate hole size and alignment over repeated use.

Suitable for

• Drilling anchor holes in concrete and reinforced concrete
• Making fixing and installation holes in brick and blockwork
• Electrical and plumbing installations where precise masonry holes are required
• General renovation and repair tasks involving hard building materials

Key specifications

• Drill diameter: 13 mm
• Shank type: SDS+ compatible
• Intended materials: concrete, brick and similar masonry
• Tip: carbide-tipped geometry for percussive drilling
• Primary use: rotary hammer percussive drilling

How to use

Install the MEGA SDS+ 13 mm bit into the SDS+ chuck of a compatible rotary hammer until it locks securely. Select the hammer or hammer-drill mode appropriate for masonry, position the bit tip at the marked drilling point and start at low speed to create a guide. Apply steady axial pressure and allow the tool's percussive action to do the work; avoid excessive force that can cause bit wear or breakage. Withdraw the bit periodically to clear dust and debris from the hole for efficient drilling and to maintain bit life.

Usage recommendations

For best results use with a rotary hammer rated for SDS+ bits and choose drill speeds and impact settings appropriate for concrete. Wear eye and respiratory protection when drilling masonry and clear dust from holes before inserting anchors. Replace the bit if chipping or significant wear is observed.