Drill Bit MEGA SDS+ 16 mm model 81630 for rotary and hammer drills

MEGA SDS+ 16 mm drill bit model 81630 is a rotary and hammer drilling accessory designed for SDS+ chucks. With a 16 mm diameter and a carbide tip geometry suited to impact drilling, this drill bit is intended for creating holes in masonry, concrete and similar construction materials. It is compatible with SDS+ rotary and hammer drills and is suitable for tasks such as anchor installation, electrical and plumbing openings, and general construction drilling.

Advantages

The MEGA SDS+ 16 mm drill bit provides consistent hole diameter and straight drilling thanks to its rigid shank and optimized flute design that removes dust efficiently during impact drilling. Its SDS+ shank ensures secure retention in compatible chucks and quick bit changes. The carbide tip improves wear resistance and maintains cutting performance in abrasive materials, while the drill geometry reduces jamming and increases drilling speed in concrete and masonry.

Suitable for

• Drilling anchor and dowel holes in concrete and masonry
• Creating openings for electrical conduits and plumbing installations
• General construction and renovation tasks requiring 16 mm holes
• Work with SDS+ rotary and hammer drills on stone, brick and block materials

Key specifications

• Diameter: 16 mm
• SDS+ shank type for compatible chucks
• Intended materials: concrete, masonry, brick, stone
• Tip material: carbide cutting tip for impact drilling
• Flute design: optimized for efficient dust removal during hammer drilling

How to use

Install the MEGA SDS+ 16 mm drill bit into an SDS+ compatible chuck until it locks securely. Select the rotary hammer or SDS+ rotary drill mode appropriate for the material and position the drill perpendicular to the work surface. Start drilling at low speed to seat the bit, then apply steady pressure while allowing the tool's impact action to do the cutting. Withdraw the bit periodically to clear dust and prevent overheating; when drilling deep holes, remove dust more frequently to maintain efficiency.

Usage recommendations

Use appropriate personal protective equipment including safety glasses, hearing protection and a dust mask when drilling concrete and masonry. For longer holes or harder materials, use intermittent drilling and dust extraction where possible. Ensure the drill is set to the correct mode for SDS+ impact drilling and verify compatibility with the drill's chuck before use.