Drill Bit MEGA SDS+ 20 mm (model 82060)

MEGA SDS+ drill bit 20 mm is a purpose-built masonry bit for SDS+ rotary hammers and hammer drills. Designed for drilling accurate 20 mm holes in concrete, brick and natural stone, the bit combines a hardened carbide tip with a flute geometry that removes dust efficiently during percussion drilling. The standard SDS+ shank provides quick, tool-free bit changes and secure coupling with compatible hammer drills.

Advantages

The 20 mm MEGA SDS+ drill bit offers consistent drilling performance because of its carbide cutting tip and robust steel body that resist wear in heavy-duty use. Its flute design facilitates dust extraction to maintain drilling speed and reduce clogging. The SDS+ shank ensures fast, reliable insertion and prevents rotation inside the hammer chuck, while the bit length and diameter are matched to common anchoring and fixing requirements.

Suitable for

• Drilling 20 mm holes for anchors and chemical anchors in concrete
• Creating openings for through bolts and heavy-duty fixings in masonry
• Preparing holes for renovation work in brickwork and natural stone
• Professional construction and site work using SDS+ rotary hammers

Key specifications

• Shank type: SDS+ compatible
• Diameter: 20 mm
• Intended materials: concrete, masonry, natural stone
• Tip material: carbide cutting tip for percussion drilling
• Body material: hardened steel with helical flute for dust removal

How to use

Insert the MEGA SDS+ 20 mm drill bit into the SDS+ chuck of a compatible rotary hammer until it locks. Select hammer or rotary-hammer mode according to the material: use percussion hammering for concrete and masonry, and rotary-only for softer stone if recommended by the tool manufacturer. Start drilling at low speed to establish the hole, then increase pressure and maintain steady feed without excessive force. Periodically withdraw the bit to clear dust and allow cooling during prolonged drilling.

Usage recommendations

Use appropriate personal protective equipment including eye and ear protection and a dust mask. For accurate anchor holes, verify drill depth with a depth stop or tape on the bit. Avoid overheating by allowing the bit to clear dust regularly and by using correct hammer settings for the material.