Drill Bit MEGA SDS+ 24 mm for Concrete, model 82426

MEGA SDS+ 24 mm for Concrete, model 82426, is a 24 mm diameter SDS+ drill bit engineered for rotary and hammer drilling in concrete and masonry. Designed to fit SDS+ chucks, this drill bit is intended for use with hammer drills and rotary hammers to produce clean 24 mm holes for anchors, dowels and through-fixings. The bit's geometry and material are optimized for penetrating reinforced concrete, block and brick while maintaining drilling speed and straightness.

Advantages

The MEGA SDS+ 24 mm drill bit provides consistent drilling performance in concrete and masonry thanks to its robust tip geometry and balanced flute design. It is compatible with standard SDS+ hammer drills, enabling efficient hammering action and stable bit retention. The bit is suitable for repeated anchor and fixing installation tasks and is built to withstand the impact loads typical of hammer drilling in masonry substrates.

Suitable for

• Drilling 24 mm diameter holes for chemical and mechanical anchors
• Creating through-holes and fixing points in concrete, block and brick
• Professional construction work and DIY anchor installation
• Preparatory drilling for electrical and plumbing fixings in masonry

Key specifications

• Shank type: SDS+ compatible shank for hammer drill chucks
• Drill diameter: 24 mm
• Intended materials: concrete and masonry (reinforced concrete, block, brick)
• Application mode: rotary and hammer drilling with rotary hammer or hammer drill
• Typical uses: anchor holes, dowels, through-fixings

How to use

Insert the MEGA SDS+ 24 mm drill bit into the SDS+ chuck of a compatible rotary hammer or hammer drill and secure it according to the tool manufacturer's instructions. Select the hammer drilling mode for concrete and masonry. Position the bit at the required drilling location, apply steady axial pressure, and allow the tool's hammering action to advance the hole. Withdraw the bit periodically to clear dust and debris for faster, straighter drilling. For through-holes, continue until the required depth is reached.

Usage recommendations

Use appropriate personal protective equipment including eye and hearing protection and dust mask when drilling in concrete. For optimal performance, match the drill speed and hammer energy to the substrate and check the bit regularly for wear; replace the bit when cutting performance or accuracy declines.