Drill Bit MEGA SDS+ 24 mm model 82480

MEGA SDS+ 24 mm model 82480 is a rotary hammer drill bit designed for producing precise 24 mm diameter holes in masonry, concrete and similar building materials. The bit uses an SDS+ shank to ensure secure engagement with compatible rotary hammers and enables quick tool changes. It is intended for drilling tasks where a larger-diameter, robust masonry bit is required for anchors, through-holes and fixture installation.

Advantages

The SDS+ connection provides reliable retention and efficient power transfer from the rotary hammer to the 24 mm carbide tip, reducing slippage during heavy-duty operation. The 24 mm cutting diameter and optimized flute design evacuate dust and debris effectively, maintaining drilling speed and bit life. The bit is balanced for reduced vibration and is suitable for repeated use in professional and serious DIY applications.

Suitable for

• Drilling 24 mm holes in concrete and reinforced concrete for anchors and dowels
• Installing through-holes for plumbing or electrical conduits in masonry walls
• Preparing holes for heavy-duty fixtures and structural fastenings
• Use with SDS+ rotary hammer drills for medium to heavy drilling tasks

Key specifications

• Cutting diameter: 24 mm
• Shank type: SDS+ compatible
• Intended material: masonry, concrete and similar building materials
• Use case: rotary hammer drilling for anchor and through-holes

How to use

Fit the SDS+ shank securely into the chuck of a compatible rotary hammer. Mark the drilling position, set the rotary hammer to hammer-drill mode if applicable, and start drilling at low pressure to establish the hole. Apply steady, even pressure and allow the tool to advance the bit; avoid excessive force which can overheat the bit or damage the tool. Periodically withdraw the bit to clear dust and debris when drilling deep holes.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses, hearing protection and dust mask. For reinforced concrete, use progressive drilling and check for rebar; if rebar is encountered, use a suitable rebar-cutting or specialized bit. Store the bit dry and clean to protect the cutting edges and ensure consistent performance.