Drill Bit MEGA SDS+ 26 mm model 82660

Drill Bit MEGA SDS+ 26 mm model 82660 is an SDS+ rotary hammer drill bit with a 26 mm cutting diameter, designed for drilling into concrete, masonry and other hard mineral materials. The SDS+ shank ensures quick, secure insertion and optimal transfer of impact energy from compatible rotary hammer drills, supporting efficient drilling in renovation and construction applications.

Advantages

The 26 mm diameter provides a balance between hole size and drilling speed, enabling effective removal of material while maintaining bit stability. The SDS+ connection reduces slippage and simplifies tool changes, while the chisel-shaped carbide tip improves penetration and wear resistance when working with reinforced concrete and natural stone. The bit’s length and geometry are engineered to support dust evacuation and prevent binding during impact drilling.

Suitable for

• Drilling holes in concrete for anchors and fixings
• Creating openings in masonry and brickwork
• Preparing passages for pipes or conduit in renovation projects
• Light to medium-duty demolition drilling where a 26 mm hole is required

Key specifications

• Cutting diameter: 26 mm
• Shank type: SDS+
• Intended material: concrete, masonry and similar mineral substrates
• Tip material: carbide cutting tip for improved wear resistance
• Application: rotary hammer (impact drilling)

How to use

Select a rotary hammer drill compatible with SDS+ shanks and set the tool to the rotary hammer (impact) mode. Securely insert the SDS+ shank into the drill’s chuck until it locks. Mark the drilling position, start drilling at low speed to establish a guide hole, then increase speed and apply steady forward pressure while allowing the tool’s impact action to do the work. Periodically withdraw the bit to clear dust and debris, and use appropriate drill stop or depth gauge where a precise hole depth is required. Wear suitable personal protective equipment when drilling.

Usage recommendations

Use with compatible SDS+ rotary hammers rated for the required drilling diameter, keep the carbide tip clean of debris, and replace the bit when wear significantly reduces drilling performance. For reinforced concrete, use controlled pressure and consider pre-drilling smaller pilot holes if needed. Always follow safety guidelines for dust control and eye, ear, and hand protection.