Abrasive Belt Menzer RED 750 x 200 mm for BSM 750E/S, corundum grit K60

Abrasive Belt Menzer RED 750 x 200 mm for BSM 750E/S, corundum grit K60 is a replacement sanding belt sized to fit machines accepting 750 x 200 mm belts, such as the Menzer BSM 750E and BSM 750S. The belt is constructed with corundum abrasive in K60 grit, engineered for medium material removal and reliable surface preparation. It is intended for work on wood, painted surfaces and light metal deburring, offering consistent cut and durability for routine sanding, leveling and pre-finishing tasks.

Advantages

The corundum abrasive provides balanced cutting performance and wear resistance suitable for a range of materials. K60 grit achieves effective material removal while leaving a surface ready for subsequent finer sanding or finishing. The belt dimensions ensure compatibility with belt sanders that accept 750 x 200 mm belts, enabling straightforward replacement and steady operation. Its construction helps maintain a uniform finish and reduces the need for frequent belt changes during moderate sanding workloads.

Suitable for

• Sanding and leveling wooden surfaces
• Removing old paint and preparing painted substrates
• Deburring and light material removal on non-ferrous metals
• Pre-finishing surface preparation before varnishing or painting
• Use with Menzer BSM 750E and BSM 750S or compatible 750 x 200 mm machines

Key specifications

• Size: 750 x 200 mm
• Abrasive type: corundum (aluminum oxide)
• Grit: K60 (medium)
• Intended materials: wood, painted surfaces, light metals
• Application: sanding, leveling, deburring, surface preparation

How to use

Install the abrasive belt according to the machine manufacturer’s instructions, ensuring correct tracking and tension for the 750 x 200 mm belt. Operate the sander at the recommended speed for the material being processed and apply consistent, moderate pressure to avoid glazing the abrasive. For painted surfaces or metal deburring, start with light passes to assess removal rate, then progress as needed. Replace the belt when cutting efficiency noticeably decreases or if physical damage occurs.

Usage recommendations

For best results, use the K60 belt for initial material removal and surface leveling, then follow with finer grits for smoothing and finishing. Wear appropriate personal protective equipment, such as eye and respiratory protection, and refer to the sander’s safety guidelines when changing belts or performing sanding operations.