Abrasive sanding paper roll Menzer RED 93 mm × 5 m, grit P150

Menzer RED abrasive sanding paper roll, 93 mm × 5 m with grit P150, is designed for manual and machine sanding of wood, painted surfaces and fillers. The medium-grit P150 delivers consistent material removal while enabling controlled smoothing and feathering of edges. The roll format provides continuous sandpaper length for repetitive sanding tasks and can be cut to the required size for sanding blocks, profile sanders or hand-held use.

Advantages

This sanding paper roll offers uniform abrasive distribution for even sanding results and predictable surface finish. The 93 mm width fits common sanding blocks and many profile sanders, while the 5 m length reduces the need to change sheets frequently. The P150 grit balances material removal and surface refinement, making it suitable for preparing substrates for primer and topcoat applications. The product is compatible with both manual sanding and machine-assisted work.

Suitable for

• Sanding wood surfaces to remove minor defects and to smooth contours
• Feathering edges of painted or filler areas before repainting
• Preparation of surfaces prior to priming, sealing or finishing
• Use with sanding blocks, profile sanders and for hand sanding in renovation and carpentry

Key specifications

• Width: 93 mm
• Length: 5 m (continuous roll)
• Abrasive grit: P150 (medium)
• Suitable substrates: wood, paint, filler
• Application mode: manual and machine sanding

How to use

Cut a piece of the roll to match the size of your sanding block or sander. For hand sanding, wrap the paper around a suitable block to maintain a flat, even contact with the surface. When using a profile sander, attach the cut strip according to the tool manufacturer’s instructions. Apply moderate pressure and sand in the direction of the grain on wood or with light passes over painted and filled areas. Replace the strip when abrasive performance decreases or when clogging affects the finish.

Usage recommendations

For best results, start with P150 to smooth and feather small imperfections; follow with a finer grit if a smoother finish is required before priming or topcoating. Keep the abrasive clean by occasionally brushing or tapping out debris, and ensure workpieces are free of nails or hard contaminants that could damage the abrasive.