Double-sided foam mounting tape 36 mm MG model 492802

Double-sided foam mounting tape MG 36 mm (model 492802) is a pressure-sensitive adhesive tape with a closed-cell foam carrier engineered for bonding, mounting and sealing tasks. With a 36 mm width and an even adhesive layer on both sides, the tape provides reliable contact on slightly uneven surfaces, edges and trims. It is intended for indoor applications on materials such as metal, glass, painted surfaces, plastics and wood, and is suitable for mounting signs, trims, panels and lightweight fixtures where a concealed, vibration-damping bond is required.

Advantages

The foam core compensates for minor surface irregularities and absorbs vibration, while the pressure-sensitive adhesive offers immediate tack and consistent holding power. The double-sided format enables invisible joints and clean mounting without mechanical fasteners. The 36 mm width balances ease of handling with sufficient bonding area for small to medium-sized fixtures.

Suitable for

• Mounting decorative trims and profiles
• Fixing lightweight panels and signboards indoors
• Bonding plastic, metal, painted wood and glass surfaces
• Sealing joints and edges where a low-profile adhesive is needed

Key specifications

• Carrier: closed-cell foam for surface conformity and vibration damping
• Adhesive type: pressure-sensitive adhesive on both sides
• Width: 36 mm for medium bonding area
• Application: indoor use on smooth or slightly uneven substrates
• Color: typically neutral (depending on production batch)

How to use

Ensure both mating surfaces are clean, dry and free from grease, dust or loose paint. Cut the tape to the required length, remove one release liner and press the exposed adhesive onto the first surface with firm, even pressure. Remove the second liner and align the part to be bonded; press firmly along the bond line to achieve full contact. Allow the joint to reach handling strength; final bond strength increases over time under sustained pressure and ambient temperature.

Usage recommendations

For best results, apply at room temperature and avoid stretching the tape during application. Use firm pressure or a roller to maximize contact and adhesive wet-out. Not intended for heavy structural loads or prolonged outdoor exposure; test on a small area if surface coatings or plastics are unfamiliar.