MICROCHIP Micro Chip IPA Plus plastic cleaner spray 400 ml (CHE1639)

MICROCHIP Micro Chip IPA Plus plastic cleaner spray 400 ml is a solvent-based cleaning fluid formulated for effective degreasing and contaminant removal from plastic surfaces. Presented in a 400 ml aerosol can, the product uses isopropyl alcohol as the primary solvent to dissolve oils, flux residues, fingerprints and light particulate soiling on housings, panels and electronic plastic parts. The spray format enables targeted application and rapid evaporation, leaving surfaces clean and ready for inspection, assembly or additional surface treatment.

Advantages

The cleaner provides fast-acting solvent action with a formulation optimized for plastics, offering residue-free drying and minimal interaction with common engineering plastics when used as directed. The aerosol delivery allows controlled, local application to recessed areas and connectors. The formulation is suitable for removing oils, smudges and light adhesives while supporting efficient maintenance workflows for electronics enclosures and plastic assemblies.

Suitable for

• Degreasing and cleaning plastic housings and panels
• Removing flux residues and fingerprints from electronic plastic parts
• Preparing plastic surfaces prior to inspection or assembly
• Spot cleaning around connectors, vents and seams

Key specifications

• Form: aerosol spray, 400 ml can
• Active solvent: isopropyl alcohol-based formulation
• Evaporation: fast-drying, low-residue
• Material compatibility: formulated for use on common engineering plastics (test before use on sensitive materials)
• Application: targeted spray for local cleaning and degreasing

How to use

Shake the can briefly before use. Hold the aerosol upright and apply short bursts to the contaminated plastic surface from a distance of about 15–25 cm. Allow the solvent to evaporate; excess deposits can be wiped away with a lint-free cloth if necessary. When cleaning recessed areas or connectors, use short sprays and, if required, a soft brush to dislodge particles. Test on a small inconspicuous area before full application to confirm material compatibility.

Usage recommendations

Use in a well-ventilated area and avoid open flames or sparks during application. Wear appropriate hand and eye protection if there is potential for splashing. Store the aerosol upright at moderate temperatures and keep out of reach of children. For best results on sensitive or painted plastics, perform a compatibility test prior to widespread use.