Wireless Access Point MikroTik LtAP LTE7 kit — LTE Cat.7, GPS, 2.4 GHz Wi‑Fi, IP54

The MikroTik LtAP LTE7 kit is a weatherproof wireless access point that combines LTE Cat.7 cellular connectivity, integrated GPS and 2.4 GHz Wi‑Fi in a single compact unit. Designed for outdoor or mobile deployments, this device provides a cellular backhaul for internet access and a local wireless network for users and devices. The unit supports SIM-based failover and remote management and meets IP54 protection class for dust and splash resistance, making it suitable for installations in exposed environments.

Advantages

The LtAP LTE7 kit delivers LTE Cat.7 performance for higher cellular throughput and improved link reliability while the built-in GPS enables location tracking and time-sync for network applications. The integrated 2.4 GHz Wi‑Fi provides local connectivity for client devices and the rugged, weatherproof enclosure with IP54 rating reduces the need for sheltered mounting. Remote management capabilities simplify configuration and monitoring, and dual power options allow flexible deployment in fixed or vehicle-mounted scenarios.

Suitable for

• Outdoor Wi‑Fi coverage for small sites, kiosks, or remote offices
• Mobile internet access in vehicles, temporary sites, or field equipment
• Redundant or primary internet via LTE where wired connections are unavailable
• Location-based services and GPS tracking for fleet and asset monitoring

When it may not be suitable

This access point provides single‑band 2.4 GHz Wi‑Fi rather than dual‑band operation; environments requiring high-density 5 GHz networks or very high local Wi‑Fi throughput may need a different product. For deployments that need full waterproofing or submersion protection, an IP rating higher than IP54 would be required.

Key specifications

• Cellular category: LTE Cat.7 for higher LTE data rates
• Wi‑Fi: 2.4 GHz single‑band access point
• GPS: integrated receiver for location and timing
• Protection: IP54 dust and splash resistant enclosure
• Management: remote configuration and monitoring support
• Power options: DC power input and support for vehicle power (depending on installation)
• Mounting: designed for outdoor and mobile mounting

How to use

Install the unit in a location with good cellular signal and adequate exposure for GPS reception, mounting it on a pole or vehicle bracket as required. Insert an active SIM card into the cellular slot, connect power using the provided DC input or vehicle power connection, and configure the device through the MikroTik management interface to set up AP credentials, cellular APN, and failover rules. Verify Wi‑Fi SSID settings and secure access with a strong WPA2/WPA3 password as supported by the device firmware. Test connectivity and adjust antenna orientation or placement to optimise signal levels.

What to consider before purchase

• Required cellular band support and compatibility with your mobile operator
• Whether single‑band 2.4 GHz Wi‑Fi meets your local coverage and throughput needs
• Mounting location and whether IP54 protection is sufficient for the environment
• Power source availability for fixed or mobile installation

Usage recommendations

For reliable performance, place the LtAP LTE7 kit where it has a clear line of sight to cell towers and an unobstructed view of the sky for GPS. Keep firmware updated and use operator‑verified APN settings. For environments with many nearby Wi‑Fi networks, select channel settings carefully to reduce interference on 2.4 GHz.