4G LTE Mobile Router Milesight UR32L04EUPW PoE Wi-Fi industrial cellular router

MILESIGHT UR32-L04EU-P-W 4G LTE Mobile Router Milesight UR32L04EUPW PoE Wi-Fi is an industrial cellular router designed for reliable wireless data transmission over 4G LTE (Cat4) and 3G networks. Equipped with an NXP industrial-grade processor, dual SIM support and an integrated cellular modem, the router delivers up to 150 Mbps download and 50 Mbps upload, combined with Wi‑Fi and wired Ethernet connectivity. The compact metal housing, wide operating temperature range and low power consumption make this device suitable for a variety of M2M and IoT deployments.

Advantages

The router combines cellular, Wi‑Fi and Ethernet interfaces in a single compact unit with PoE support, enabling flexible installation and simplified power management. Dual SIM and robust failover features improve uptime in changing mobile networks. Low power consumption and an extended operating temperature range support continuous operation in industrial environments. Built‑in watchdog and advanced networking protocols provide stable communication and remote management options.

Suitable for

• Remote telemetry and IoT gateways
• Backup or primary WAN connectivity for industrial sites
• Transportation and fleet tracking systems
• Smart city infrastructure and utility monitoring
• Edge networking for retail kiosks and vending machines

Key specifications

• Cellular: 4G LTE Cat4 / 3G with maximum download 150 Mbps and upload 50 Mbps
• Processor and memory: 528 MHz ARM Cortex‑A7 CPU, 128 MB DDR3 RAM, 128 MB flash
• Power: 9–48 V DC input or 2× PoE IEEE 802.3af/at; typical consumption 1.9 W, max 2.4 W
• Ethernet and PoE: 1× WAN/LAN + 1× LAN, 10/100 Mbps; 2× PoE powered LAN ports
• Wi‑Fi: IEEE 802.11b/g/n, 2.4 GHz
• SIM and expansion: dual SIM (2× Mini SIM-2FF or 1× SIM + 1× Micro SD)
• Antennas and indicators: 3× 50 Ω SMA connectors; power, system, SIM and 3× signal LEDs
• Operating conditions: −40 °C to +70 °C, 0–95% non‑condensing humidity
• Mechanical: metal housing, IP30, dimensions 180×90×26 mm, weight 271 g; table/wall/DIN‑rail mountable

How to use

Install the router in a suitable location with adequate cellular signal and mount it on a table, wall or DIN rail. Connect power via DC input or PoE and attach external cellular and Wi‑Fi antennas to the SMA connectors. Insert SIM card(s) and configure cellular, WAN and Wi‑Fi settings through the web management interface, CLI or DeviceHub. Use the dual SIM and failover settings to ensure continuous connectivity and configure VPNs, firewall and routing protocols as required by your network topology.

Usage recommendations

For stable long‑term operation, place antennas for optimal signal strength, keep firmware updated and configure watchdog and remote management features. Use PoE for simplified deployment where PoE switches or injectors are available, and configure VPN and firewall rules to secure remote access.