Reciprocating Saw Blade M.K. Morse Havoc Bimetal 6 TPI 150x22x1.6 mm, 3 pcs

Reciprocating Saw Blade M.K. Morse Havoc Bimetal 6 TPI 150x22x1.6 mm, 3 pcs are bimetal sabre blades engineered for cutting metal and mixed materials with hand-held reciprocating saws. Each blade combines high-speed steel teeth welded to a flexible spring-steel backing, providing a balance of cutting performance and resistance to breakage. The 6 TPI tooth pitch and 150 mm length suit medium-thickness metal and multi-material demolition or repair tasks, while the 22 mm mounting width fits common reciprocating saw clamps.

Advantages

These M.K. Morse Havoc blades deliver consistent cutting life due to the bimetal construction: hardened high-speed steel teeth maintain sharpness, and the spring-steel back absorbs bending stresses to reduce tip and body breakage. The 6 TPI geometry offers a compromise between fast material removal and chip control when working on steel, pipes, profiles and composite assemblies. Supplied as a pack of three, the set provides spare blades for continued work without interruption.

Suitable for

• Cutting steel pipes, rods and profiles
• Demolition and renovation work involving mixed materials
• Plumbing installations and repairs
• Metal fabrication and on-site trimming
• General repair and maintenance with reciprocating saws

Key specifications

• Blade type: bimetal reciprocating (sabre) saw blade
• Tooth pitch: 6 TPI (teeth per inch) for medium-coarse cuts
• Length: 150 mm overall cutting length
• Mounting width: 22 mm
• Thickness: 1.6 mm
• Pack contents: 3 blades
• Material: high-speed steel teeth welded to spring-steel backing

How to use

Install the blade into the reciprocating saw according to the tool manufacturer's instructions, ensuring the blade is secured with the teeth oriented toward the workpiece. Start cutting at low speed to establish a controlled kerf, then increase speed and feed steadily while allowing the blade to do the work. For metal cutting, use steady pressure and avoid lateral bending; let the bimetal construction absorb vibration and flex. Replace blades from the pack when wear or tooth damage reduces cutting efficiency.

Использование и уход

For best results, secure the workpiece, wear appropriate personal protective equipment, and use cutting fluid or lubricant as needed when cutting hard or thick metals to extend blade life.