Drill Bit MODECO SDS+ 6 mm MN-61-122 for Concrete

MODECO SDS+ 6 mm MN-61-122 drill bit is designed for drilling into concrete and masonry with SDS+ rotary hammers. The 6 mm diameter makes it suitable for creating anchor and fixing holes as well as light installation tasks. The SDS+ shank provides secure, rapid mounting and ensures efficient transfer of hammer impact from the machine to the carbide tip for improved drilling performance in hard substrates.

Advantages

The drill bit features a hardened carbide tip for wear resistance and sustained cutting ability in concrete. The SDS+ shank system enables quick and stable tool changes without additional adapters, reducing downtime on the job. Its 6 mm diameter balances penetration speed and hole precision for common anchoring and fastening applications. The bit is suitable for repeated use in professional and DIY settings when used within recommended operating parameters.

Suitable for

• Drilling anchor and fixing holes in concrete and masonry
• Preparing mounting points for light fixtures and brackets
• Installing anchors, screws and dowels in structural and non-structural walls
• General light-duty concrete drilling with SDS+ rotary hammers

Key specifications

• Shank type: SDS+
• Diameter: 6 mm
• Intended material: concrete, masonry
• Tip material: carbide (hardened cutting tip)
• Use case: rotary hammer drilling with hammer action

How to use

Install the MODECO SDS+ 6 mm drill bit into a compatible SDS+ rotary hammer until it locks. Select an appropriate rotation and hammer mode on the tool, and position the drill perpendicular to the work surface. Apply steady pressure and allow the hammer action to advance the bit; avoid excessive side force to prevent breakage. Clear debris from the hole periodically to maintain drilling efficiency. After drilling, remove the bit by pulling it out of the chuck according to the rotary hammer manufacturer’s instructions.

Usage recommendations

Use appropriate personal protective equipment including safety glasses, gloves and hearing protection. Match the drill speed and hammer settings to the substrate; for reinforced concrete, use slower feed with firm hammer action. Do not use the bit for metal or wood; select the correct bit type for those materials. Store the bit dry and clean to prevent corrosion and check the tip for wear before repeated use.