Drill bit MODECO SDS+ 10 mm MN-61-141 for concrete

Drill bit MODECO SDS+ 10 mm MN-61-141 for concrete is a carbide-tipped masonry bit designed for use with SDS+ rotary hammers. With a 10 mm diameter and an SDS+ shank, this drill bit provides stable connection and fast bit changes when working on concrete, brick and similar building materials. The geometry and material of the cutting tip are intended to withstand the impacts of hammer drilling and to maintain drilling accuracy during repetitive tasks in construction and renovation work.

Advantages

The SDS+ shank ensures a reliable, play-free fit in compatible rotary hammers and enables quick tool-free bit replacement. The carbide cutting tip offers wear resistance and maintains cutting performance when drilling into hard substrates. The 10 mm diameter is a common size for anchor and fastening preparation, providing a balance between drilling speed and hole precision. The bit's construction supports sustained hammer action and repeated use on masonry surfaces.

Suitable for

• Drilling holes in concrete for anchors and expansion bolts
• Installing electrical boxes and conduit in masonry walls
• Drilling through brick and blockwork during renovation
• Light to medium duty construction and installation tasks

Key specifications

• Diameter: 10 mm
• Shank type: SDS+
• Tip material: carbide-tipped cutting head
• Intended materials: concrete, masonry, brick, block
• Application: rotary hammer (hammer drilling) use

How to use

Select an SDS+ compatible rotary hammer with a suitable power rating for concrete drilling. Insert the SDS+ shank into the tool's chuck until it locks. Mark the drilling spot and use appropriate personal protective equipment, including eye and hearing protection and dust control. Start drilling at low speed to establish the position, then apply steady pressure and allow the hammer action to advance the hole. Withdraw the bit periodically to clear dust and debris from the hole for efficient cutting and to reduce heat buildup. After drilling, remove the bit by retracting the chuck according to the tool manufacturer's instructions.

Usage recommendations

Use the MODECO SDS+ 10 mm bit with properly rated rotary hammers and suitable drill speeds for concrete to achieve clean holes and extend bit life. For deeper holes or continuous work, withdraw the bit more frequently to clear debris; consider using dust extraction or wet drilling methods where appropriate and allowed. Replace the bit if the carbide tip becomes chipped or worn to maintain drilling accuracy and safety.