Concrete SDS+ Drill Bit MODECO 10 mm MN-61-145

The MODECO Concrete SDS+ Drill Bit 10 mm is designed for use with rotary hammer drills fitted with an SDS+ shank. Intended for drilling into concrete, masonry and other mineral substrates, this 10 mm bit provides the standard diameter required for anchor and dowel installation. The bit's geometry and carbide tip are configured to deliver consistent drilling performance in common construction and renovation tasks.

Advantages

The drill bit offers stable centring and efficient material removal thanks to its flute design and carbide cutting head. Its SDS+ shank ensures secure connection to compatible rotary hammers, reducing slippage during heavy-duty percussion drilling. The standard 10 mm diameter allows compatibility with commonly used anchors and dowels, making it practical for both professional tradespeople and DIY users working on concrete and masonry.

Suitable for

• Drilling anchor and dowel holes in concrete and reinforced concrete
• Creating holes in brick, blockwork and natural stone
• Preparation work for fixtures, supports and signage on mineral surfaces
• General construction and renovation tasks requiring a 10 mm hole

Key specifications

• Shank type: SDS+ compatible
• Diameter: 10 mm
• Tip material: carbide cutting head for mineral materials
• Intended use: percussion and rotary-percussion drilling in concrete and masonry
• Flute design: optimized for dust removal during drilling

How to use

Install the SDS+ shank securely into the rotary hammer chuck according to the tool manufacturer's instructions. Select the rotary-percussion mode for concrete and masonry drilling. Mark the drilling point and start drilling at low speed to create a guide indentation, then increase speed while applying steady, moderate pressure. Withdraw the bit periodically to clear dust from the hole and maintain drilling efficiency. Use appropriate anchors or dowels sized for a 10 mm hole.

Usage recommendations

Wear appropriate personal protective equipment such as safety glasses, hearing protection and dust mask when drilling. For reinforced concrete, use progressive drilling technique and check for rebar with a detector before starting. Keep the drill bit clean and store it dry to preserve the carbide tip and flute condition.