Drill Bit MODECO SDS+ 14 mm MN-61-163 for Concrete

MODECO SDS+ 14 mm MN-61-163 is a carbide-tipped masonry drill bit designed for drilling into concrete and similar dense masonry materials. The bit features an SDS+ shank for use with hammer drills that accept SDS+ systems and provides a secure fit during hammering and rotation. It is intended for construction and installation tasks that require reliable, repeatable hole-making in concrete, such as fastening anchors, anchors, and through-fixings.

Advantages

The carbide-tipped head delivers wear resistance and maintains cutting performance when working with abrasive concrete surfaces. The SDS+ shank ensures quick installation into the drill chuck and reduces slippage during impact drilling. The 14 mm diameter provides a balance between hole size and drilling speed for standard anchor and fixing applications. The bit's geometry is optimized for efficient dust removal and controlled chip ejection, supporting cleaner and more effective drilling in masonry.

Suitable for

• Drilling holes for mechanical anchors and fixings in concrete
• Creating passages for dowels, bolts, and rebar installations where a 14 mm hole is required
• General-purpose hammer-drill work in dense masonry, stone, and reinforced concrete

Key specifications

• Tip material: carbide-tipped cutting head for improved wear resistance
• Shank type: SDS+ shank compatible with SDS+ hammer drills
• Diameter: 14 mm for medium-to-large anchor and fixing holes
• Intended material: concrete and similar masonry materials

How to use

Install the bit into the SDS+ chuck of a compatible hammer drill until it locks in place. Select hammer-drill mode for concrete. Mark the drilling position, start at low speed to seat the bit, then increase speed and apply steady pressure while allowing the hammering action to break the material. Periodically withdraw the bit to clear dust and chips and to avoid overheating. For deep holes, remove debris more frequently to maintain drilling efficiency.

Использование и советы

Use appropriate personal protective equipment—safety glasses, hearing protection, and a dust mask—when drilling concrete. For reinforced concrete, proceed cautiously when encountering rebar and consider using a dedicated rebar-cutting bit if necessary. Match hole depth and diameter to the specifications of anchors or fasteners to ensure correct fixing performance.