Drill Core Bit MODECO SDS+ with Carbide Tips 65 mm MN-61-366

MODECO SDS+ Drill Core Bit with Carbide Tips, 65 mm diameter, is a hole saw designed for creating clean circular openings in masonry, concrete and similar hard materials. The core bit fits SDS+ rotary hammer drills and combines a robust body with carbide-tipped cutting edges to maintain cutting performance and resist wear during repeated use. This tool is intended for professional and DIY tasks where precise, round holes are required for installations and passage of pipes or conduits.

Advantages

The carbide tips provide improved wear resistance and maintain sharpness longer than plain steel teeth, which helps to achieve cleaner holes and more consistent cutting speed. Compatibility with SDS+ chucks ensures secure attachment and efficient transmission of impact force for faster drilling in hard substrates. The 65 mm diameter is a common size for pipe and fixture installations, reducing the need for additional finishing work around the hole.

Suitable for

• Drilling holes for water, gas or electrical conduits through concrete and masonry
• Creating openings for fixture anchors and mounting plates
• Renovation and construction tasks requiring precise circular holes in hard materials

Key specifications

• Cutting diameter: 65 mm
• Shank type: SDS+ compatible
• Cutting material: carbide-tipped teeth for improved wear resistance
• Primary application materials: concrete, masonry and similar hard building materials
• Design: hole saw / core bit for rotary hammer drilling

How to use

Install the core bit into an SDS+ rotary hammer according to the drill manufacturer’s instructions and ensure the shank is fully engaged and locked. Mark the drilling position and start at low speed to establish the center, then apply steady pressure and use hammer action as required for the substrate. Withdraw periodically to remove dust and core fragments and to allow the bit to cool. After completing the hole, remove any rough edges with appropriate tools.

Usage recommendations

Use proper personal protective equipment including eye protection, hearing protection and dust mask when drilling. For longer life of the carbide tips, avoid excessive lateral forces and allow the bit to work at its designed feed rate; use water cooling only if recommended by the drill manufacturer and suitable for SDS+ use.