Wood Drill Bit Set MODECO MN-61-506 — spiral cylindrical 6 mm, 10 pieces

Set of MODECO wood drill bits MN-61-506 contains ten 6 mm spiral cylindrical bits designed for drilling in timber and wooden materials. These twist-style bits have a straight-shank, standard length and a spiral flute geometry that evacuates wood chips efficiently. The set is intended for common woodworking tasks where accurate, clean 6 mm holes are required and is compatible with handheld drills and drill drivers.

Advantages

The 6 mm spiral cylindrical design provides a balance of cutting speed and hole quality, producing straight and consistent holes in solid wood and sawn timber. The standard-length bits fit most chucks and permit stable drill-to-bit engagement for routine carpentry and furniture assembly. A set of ten identical bits ensures quick replacement on site and reduces downtime when bits dull or break during repetitive drilling operations.

Suitable for

• Drilling pilot and clearance holes in softwood and hardwood
• Furniture assembly and joinery
• Carpentry, framing and general timber work
• Installing dowels, screws and fittings requiring 6 mm holes

Key specifications

• Drill bit type: spiral twist / cylindrical
• Material compatibility: solid wood, plywood, chipboard and similar wooden materials
• Bit diameter: 6 mm
• Quantity in set: 10 pieces
• Shank style: straight shank for standard drill chucks
• Length: standard (suitable for general-purpose drilling)

How to use

Secure the chosen 6 mm bit in the drill or drill driver chuck and tighten firmly. Mark the drilling point on the wood and, if required, use a center punch or awl to prevent bit walking. Start drilling at a moderate speed, applying steady pressure and allowing the spiral flute to evacuate chips. For deep holes, periodically withdraw the bit to clear accumulated chips and reduce heat. When finished, remove the bit and inspect for wear before returning it to the set.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses and hearing protection. Match drilling speed to the wood type—slower speeds for hardwoods and higher speeds for softwoods—to prolong bit life and improve hole quality. Replace bits that show excessive wear or damage to maintain consistent results.