Drill Bit MODECO SDS+ 6 mm MN-61-904

MODECO SDS+ 6 mm drill bit MN-61-904 is a carbide-tipped rotary hammer bit designed for impact drilling in concrete, masonry and natural stone. The 6 mm diameter makes it suitable for creating anchor and dowel holes or through-holes when working with SDS+ rotary hammers and hammer drills. The bit is made for repeated use in construction and renovation tasks that require reliable drilling performance in hard substrates.

Advantages

The SDS+ shank ensures quick and secure fitting in compatible chucks and efficient transmission of hammer energy to the tip. A carbide cutting head provides wear resistance and extended service life when drilling abrasive materials. The 6 mm diameter offers a balance between precision and material removal, useful for standard fixings and anchors. The spiral flute geometry evacuates dust effectively to maintain drilling progress and reduce jamming.

Suitable for

• Drilling anchor and dowel holes in concrete and masonry
• Creating through-holes for cable conduits and small pipes in stone
• Installing anchors for fixtures, rails and shelving
• Light demolition or renovation tasks requiring impact drilling

Key specifications

• Shank type: SDS+
• Diameter: 6 mm
• Tip material: carbide
• Suitable materials: concrete, masonry, natural stone
• Use mode: rotary hammer / hammer drill with impact

How to use

Secure the drill bit in an SDS+ chuck according to the tool manufacturer's instructions. Mark the drilling point and use a centre punch or marker to prevent slippage. Start drilling at low speed to establish the hole, then apply steady pressure while allowing the hammer action to do the work. Periodically withdraw the bit to clear dust from the hole and prevent overheating. For deeper holes, withdraw more frequently to remove debris and check alignment.

Usage recommendations

Use appropriate personal protective equipment including eye protection, dust mask and hearing protection when performing impact drilling. Select the SDS+ drill mode on the rotary hammer and avoid excessive lateral force to prevent bit breakage. For anchors and fixings, use correct hole depth and cleaning procedures (blowing or brushing) before inserting fasteners to ensure proper hold.