Drill Bit MODECO SDS+ 6 mm - MN-61-907

MODECO SDS+ 6 mm drill bit (MN-61-907) is a rotary percussion accessory designed for use with SDS-plus shank hammer drills. With a 6 mm working diameter and an SDS+ quick-change connection, this bit is intended for drilling holes in masonry, concrete and similar mineral substrates. The bit profile and hardened tip are optimized for impact drilling to provide consistent hole geometry and reliable seating in chucks designed for SDS+ tools.

Advantages

The SDS+ shank enables fast and secure tool-to-bit connection and repeatable bit seating during frequent changes. A 6 mm diameter offers a practical balance between drilling speed and hole precision for small anchor and fastening tasks. The hardened cutting tip and fluted body support efficient debris evacuation and longer service life under impact loading. The bit is compatible with standard SDS-plus hammer drills, ensuring stable transfer of percussive force to the cutting edge.

Suitable for

• Drilling anchor and dowel holes in concrete and masonry
• Creating feed-through holes for installations and conduit
• Renovation and construction tasks requiring frequent bit changes
• Light to medium-duty impact drilling with SDS+ rotary hammers

Key specifications

• Working diameter: 6 mm
• Shank type: SDS-plus
• Intended material: concrete, masonry and similar mineral substrates
• Tip: hardened cutting edge for impact drilling
• Body: spiral flute for dust removal

How to use

Install the SDS+ shank into the hammer drill’s chuck until it locks with the quick-change mechanism. Select hammer or rotary-percussion mode on the drill according to the substrate. Start drilling at low speed to establish the hole position, then apply steady pressure and allow the tool’s percussive action to advance the bit. Periodically withdraw the bit to clear dust from the hole and to prevent clogging of the flutes. Replace the bit when the cutting performance noticeably decreases.

Usage recommendations

Use appropriate personal protective equipment including eye and hearing protection and a dust mask when drilling mineral substrates. For longer service life, avoid excessive lateral pressure and let the hammer drill’s impact action do the work. Match the 6 mm diameter to corresponding anchors, screws or sleeves for correct fastening fit.