MODECO SDS+ 14 mm drill bit is a rotary/percussion accessory designed for SDS+ chucks. With a 14 mm diameter, this drill bit is intended for drilling into masonry, concrete, brick and similar materials. The carbide tip and grooved shank work together to remove debris efficiently during hammer drilling, making it suitable for construction, renovation and installation tasks with compatible SDS+ hammer drills and rotary hammers.
Advantages
The MODECO SDS+ 14 mm drill bit offers consistent drilling performance in hard materials due to its hardened steel body and carbide cutting head. The SDS+ shank ensures secure, quick fitting and reliable power transfer from the tool to the bit, while the flute geometry helps evacuate dust and chips to maintain drilling speed. Its standardized 14 mm diameter provides predictable hole sizes for anchors, dowels and through-holes commonly used in structural and utility installations.
Suitable for
- Drilling holes in concrete for wall anchors and fixings
- Masonry and brick drilling for installation of electrical boxes and conduits
- Renovation tasks requiring hammer drilling with SDS+ tools
- Professional and DIY applications where a 14 mm hole is required
Key specifications
- Diameter: 14 mm
- Shank type: SDS+ compatible shank for hammer drills and rotary hammers
- Intended materials: concrete, masonry, brick and similar substrates
- Cutting tip: carbide-tipped for enhanced wear resistance
- Drilling mode: rotary and percussive operation
How to use
Insert the SDS+ shank into the hammer drill or rotary hammer until it locks in place, ensuring the tool is switched off before fitting. Select the hammer or rotary percussion mode appropriate for concrete or masonry, position the bit at the marked drilling point, and start drilling at low speed to establish a guide. Increase speed and apply steady forward pressure without forcing the bit; allow the hammer action to do the work. Withdraw the bit periodically to clear dust and prolong bit life.
Usage recommendations
Use appropriate personal protective equipment such as safety glasses, hearing protection and dust mask when drilling masonry. Match drill diameter to anchor or fastener size and avoid excessive lateral force. For extended drilling sessions, periodically remove the bit to clear debris and allow cooling. Use in SDS+ compatible hammer drills or rotary hammers only.
